Humidifier Cooler Sprayer Fresh Keeping Humidity Control Ultrasonic One Spray Ports Fruits Vegetables Industrial 600W 6KG/H

Introduction:
Ultrasonic Industrial Humidifier Cooler Sprayer 6KG/H
To ensure the effect of atomization and humidification, clean the inner machine regularly, once a month. The cleaning method is as follows: Open the cover, clean the atomizer with a soft cloth or a brush (the atomizer and the water level sensor switch should not be scratched, and household detergent cannot be used), clean the scale, and then rinse with water. When watering, do not pour water into the circuit board, which will cause a short circuit. Close the lid.
To ensure the normal operation of the machine for a long time, the water tank should be cleaned regularly, once a month. The cleaning method is as follows: Open the water tank cover. Clean the dirt on the inner wall of the water tank. Close the lid.
Working Principle:
The high frequency vibration of atomizing film will throw the water out of the surface and shape the natural and flying water fog, produce water particle of 1-10μand float in the air without heating or adding chemical, so as to achieve humidification. The appropriate relative humidity will have the decisive function in the improvement of product quality, reducing of scrap rate, anti-static, eliminating dust, air purification and environment improvement etc.
Note:
The product does not have the bucket and accessories, the bucket is only for display, customers need to configure when using.

Parameter:
Fog Volume: ≥6KG/H
Humidity: 1%-99%
Power Supply: AC110V
Power: 600W
N.W.: 50.7LBS
Control Method: Humidity Control
Applicable Space: 40-100M² (400-1000SQ.FT)
Hole: 4.3INCH(110MM)*1
Water Supply Quality: Pure Water, Tap Water(Softened)
Material: Stainless Steel
Air Volume: 160M³/H
69*35*47.5CM(27.2"*13.8"*18.7")

Items Included: 191106-EnzY
Ultrasonic Industrial Humidifier Cooler Sprayer 6KG/H