Feature:
*This module fully considers the 485 bus lightnings protection design and anti-interference design. It uses an isolation chip to realize the isolation of power supply and signals.
*Adopts standard 2.54 pitch design to facilitate your secondary development
*With 120 ohm matching resistor, short-circuiting RO can enable the matching resistor. Short-circuiting is recommended for long-distance transmission.
*Supports multi-machine communication, the same network can connect at least 128 nodes
*Can be hot-swapped and there will be no signal blocking.
*Anti-interference wiring and copper laying method to prevent signal interference
Specification:
Part name:TTL to RS485 module
Model: XY-5ASK
Material: plastic
Color: As shown in the picture
Wide voltage power supply (3.0V~5.5V)
3.3V and 5.0V signals are compatible and can be matched with the module Xinyi Electric
Power and signal isolation, high performance EMC and EMI, isolation voltage up to 2500VDC
Using imported chips, industrial-grade design, strong anti-interference ability, and powerful 485 lightning protection design, it can be used in industrial sites and harsh outdoor environments. The operating temperature is -40°C to +85°C, and the transmission distance is up to Kilometers (tested using 850 meters of 2*1.5 cable. It is recommended to use it within 800 meters. Please add a repeater if it exceeds 800 meters)
Designed with half-hole technology and a board thickness of 0.8mm, it can be easily used as a daughter board or used for soldering terminals
Equipped with RXD and TXD signal indicator lights, allowing you to have a panoramic view of the sending and receiving status.
Module size: 36.07*29.08*1.0mm
Package Contents:
1*TTL to RS485 module
Notes:
1. Due to various factors such as monitor brightness and light brightness, the actual color of the item may be slightly different from the image displayed on the website.
2. Manual measurement data may have slight deviations.
