HANGKAI 4HP 4 Stroke 53.2CC Outboard Motor Boat Engine W/Air Cooling System for 7.5-16.4ft Fishing Boats, Wooden Boats

Specification：

Bracket: Material: Aluminium Rod, Plastisol Propeller

Color: Black and Silver

Drive Rod Length: 56cm/22.05inch

Small Bracket Size: 19*8cm/7.48*3.15inch

Control Lever Length: 53cm/20.87inch

Package Size: 94*19*16cm/37.01*7.48*6.30inch

Net Weight: 4.7kg/10.36lbs

Gross Weight: 4.95kg/10.91lbs

Engine: Color: Orange, Black, Silver

Size: 26*22.5*29cm/10.24*8.86*11.42inch

Engine Model: Four-stroke 144f

Displacement: 53.2cc

Air-cooling Mode: Forced Air-cooling

Gasoline Volume: 1.2l /0.32gal

Starting Method: Hand-pull Start

Speed: 15km/H

Steering: Handle Steering

Fuel Consumption: 1-1.2 Hours/ One Tank of Gasoline

Fuel Type: Gasoline

Mounting Type: Engine

Package Size:33.5*29.5*23.5cm/13.2*11.6*9.2inch

Net Weight: 5.8kg/12.8lbs

Gross Weight: 6kg/13.2lbs

Size After Installation: 26*53*113cm/10.24*20.87*44.49inch

Features：

Speed Adjustable: There Is a Speed Adjustment Handle on This Engine's Control Lever. the Speed Can Be Controlled by Rotating the Handle.

Convenient Control Lever: This Engine Has a Lever to Control the Direction Within 360° and a Handle on the Lever to Control the Speed. It Is Convenient to Control the Running Speed by Adjusting the Handle As Well As Controlling the Running Direction by Adjusting the Lever.

Installation Instruction：

Installation Warning: Most Boats Are Approved for a Maximum Power Rating, Which Is Shown on the Boat's Nameplate. Do Not Configure Your Boat with an Outboard That Exceeds This Limit.

Installation Position: the Center of the Boat's Bottom

Outboard Installation Instructions:

Select the Outboard Engine with Corresponding Specification ( Hp ) According to the Size of the Boat, and Determine the Shaft Length of the Boat Engine by the Height of the Transom.

After Hanging the Outboard on the Transom, Lock It with Clamping Bolts.

After the Outboard Is Fixed, You Need to Pay Attention to the Water Level to Be Flooded to the Best Water Level to Ensure the Cooling Water Pump Cools the Engine Smoothly While Making the Outboard Propulsion System Play the Best Thrust Performance.

Package Included：

Engine Package:

1* Engine

1* Measuring Cup

1* Chinese Instruction

Other Accessories for Assembly

Bracket Package:

1* Drive Rod

1* Small Bracket

1* Control Lever

1* Big Wrench

1* Metal Stick

1* Screwdriver

3* Small Wrenches

4* Screws

1* English Instruction

Notes：

The Four-stroke 4 Hp Fishing Boat Engine Is Suitable for All Kinds of Small Boats of 7.5-16.4ft, Such As Rubber Boats, Fishing Boats, Wooden Boats, Etc.

The Built-in Fuel Tank Can Be Filled Once for About 2 Hours at High Speed, and the Driving Speed Is About 10~15km/H. the Driving Distance Is Different Due to Different Boat Types and Load Water Conditions.

Four-stroke Fuel Uses Gasoline over 92#. the Oil Should Be Added Separately to the Internal Oil Tank.

Although This Model Hasn't a Gear Set, the Throttle Can Be Infinitely Adjusted.

Before Using the New Machine, You Must First Add Four-stroke Special Oil. and, the Oil Is Added to the Oil Volume Cup 200ml /0.07gal. Too Much or Too Little Oil Will Seriously Affect the Engine.

The New Machine Needs to Change the Oil Once in 6 Hours, and Then Change the Oil Once in 8 Hours.

Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.