BT‑100 Car Bluetooth 5.0 Speakerphone Handsfree Wireless Audio Receiver Noise Reduction

Item Type: Car Speakerphone Material: ABS Color: As Pictures Shown Weight: Approx. 97g/3.4ozBluetooth version: Bluetooth 5.0 Bluetooth Model: BT-100 Battery capacity: 300mAh Operating range: 10 meters/32.8ft Talk time: 20-24 hours Output power: 4W Standby time: About 500 hours Voice prompt: English Charging time: 2-3 hours Device pairing: 8 pairing records can be memorized Models: suitable for IOS /Samsung/Xiaomi, tablet, laptop and other smart devices with Bluetooth function How to use:Pairing: Before using the vehicle-mounted Bluetooth speaker for the first time, it must be paired with a mobile phone that supports Bluetooth function. The vehicle-mounted Bluetooth speaker can be connected with 2 mobile phones at the same time. If you only connect with one phone, you need to connect once. Here are the pairing steps: (1) Put the vehicle-mounted Bluetooth speaker and mobile phone within 1 meter of each other. (2) Enter the pairing mode (it is the pairing mode when the red and blue LED lights flash alternately) Note: The machine will automatically enter pairing mode after starting up. (3) Activate the Bluetooth function of the phone, so that the phone starts to guide the Bluetooth device (refer to the instructions of the phone for details). (4) Select "Yet-Pro6" from the devices found by the mobile phone, and the vehicle-mounted Bluetooth speaker will be paired with the mobile phone. (Password "0000 "is required for pairing of some mobile phones.) After the pairing is successful, the voice will prompt" Complete pairing ", the vehicle-mounted Bluetooth speaker will enter the waiting state, and the blue LED light will flash every 3 seconds. (5) At this time, you can receive and make calls through the car Bluetooth speaker. Note: If the vehicle-mounted Bluetooth speaker is not paired 2 minutes after entering the pairing state, please turn off the vehicle-mounted Bluetooth speaker and pair it again according to the above steps. The car Bluetooth speaker connects the phone (1) Answer the phone: When the phone is called, the vehicle-mounted Bluetooth speaker domain] will emit a ring and voice prompt "incoming call", and short press the "answer" button for once to answer the call. (2) Hang up the call: short press the answer button for one time during the call to hang up the call and the call ends. (3) Automatic call back of the last call number: when the car Bluetooth speaker is on and the last call is made, short answer the "answer button" for two times, then the phone number of the last call will be automatically called. (4) Volume adjustment: When the vehicle-mounted Bluetooth speaker is turned on, press the "- "and "+" keys to adjust the volume until the desired volume is reached.