Steel Dent Pulling Machine Auto Body Dent Puller Welder Dent Puller Kit Body Repair Machine 220V

Product Overview:
This welding machine has many advantages such as simple operation, short welding time, little heat impact on the base material, no damage to the base material surface, good welding quality, firmness, beautiful appearance, and energy saving. lt is the most ideal equipment especially in the maintenance of steel car bodies.

Product Parameter:
1. Input Voltage: 220V
2. Power: 3KW
3. Screw size: M3/4/5/6
4. Welding Thickness: 0.4 ± 1.2mm
5. Instantaneous Maximum Current: 11000A
6. Current: 77 Gears Operation
7. Mode: Intelligent Induction Input

Panel Operation:
1. Connect the product to a suitable power source, and then press the switch to display: function (left) power (right).
2. To adjust the power intensity (current size), press the + or - button.
3. To change the function, press the function selection key.At this time, you can use the + and - buttons to select the function number.
4. Manual welding and intelligent welding:
- When using manual control, connect the torch switch connector and switch thes witch to manual mode.
- When using smart mode, there is no need to disconnect the torch switch connector and switch the switch to smart mode.

Welding Operation:
The machine can be welded manually/automatically, and the host automatically detects the short-circuit condition of the welding gun, and a welding spot is generated within 1 second. Disconnect the welding gun and the welding part for 0.5 seconds, then the next point can be welded, and others can be welded in sequence. When switches to manual mode, use the gun switch to control welding.

Item Included: 239826
1 Steel Dent Pulling Machine 220V