95pcs 5050 4 Pins RGB LED Tape Connector Kit For RGB Led Strip Light

95pcs 5050 4 Pins RGB LED Tape Connector Plug Power Splitter Cable 4pin Needle Connector Wire For RGB Led Strip Light

Features:

The wire is made of tinned copper and PVC insulation cover which is soft, bendable. You can bend the wires to any degrees you want. PVC plastic cover is durable and wearable.

Simple, tool-free installation and avoid soldering, 5050 4pin RGB LED Strip Connector Kit, plug and play.

The connection between the lamp strip and the strip, the connection between the strip and the controller, the connection between the strip and the splitter.

These LED tape connectors withstand current up to 4 A and input voltage from 0-24 V, heat resistance level from 20°C to 100°C.

The L-shaped led strip connector is used when you need to spring your light strips around a sharp 90-degree corner. The T-shaped LED strip connector is for 3-way quick splitter connection.

4 Pin male connector is widely used as a connector between LED strips and a remote controller.

4 Pin female connector with bare wire terminal connect several light segments of cut-to-size strip lights together and remote controllers.


Description:

Material: tinned copper+PVC

Capacity: 0-4 A, 0-24 V


Kit included:

Solderless buckle x10
Double-ended butt cable x8
Sheath turn buckle x2
Black 4P pin header x20
White RGB Y splitter cable x1
L-shaped corner device x12
T-shaped corner device x2
10mm bare board fixing clips x20
Screw x20