10000PSI Electric Driven Hydraulic Pump 750W Solenoid Valve Double-Acting 110V

Widely Application：

• The Manual Hydraulic Pump Can Be Used for a Variety of Hydraulic Equipment, Working on Several Assignments Such As Lifting, Pressing, Bending, Straightening, Cutting, Assembly and Disassembly.
• Punching Machine, Bending Machine, Jack Split Hydraulic

Appication:

1. the Pump Can Be Used for a Variety of Hydraulic Equipments.
2. If the Pump Is Equipped with Other Hydraulic Tools, It Can Work on Several Assignments Such As Lifting, Pressing, Bending, Straightening, Cutting, Assembly and Disassembly. Reduce Manual Work and Maximize Work Efficiency.
Punching Machine, Bending Machine, Jack Split Hydraulic Products
4. Working Mode：pedal Solenoid Valve Control

Specifications:
Input Voltage: Ac 110v 60hz
Flow Rate: 0.6l/Min(＞7mpa) - 5l/Min(＜7mpa)
Working Pressure: 290psi - 10152psi(2mpa - 70mpa)
Oil Capacity: 7l
Motor Power: 750w
Motor Speed: 1400r/Min
G.w: 30kg

Features:
Double-acting, Solenoid Valve
Manual Switch and Pedal Switch
Strong Storage Capacity
Power Saving
High Speed High Quality,Stable Woking
Easy to Operate
Safe to Use

Operation Instruction:
1. Open the Filler Before Use, the Electric Pump and Power Connections Before Oiling, Then Press down the Black Button Which Next to the Motor to Open, Press the Manual Operation Switch (up), After a Few Air Pressure, Press the Manual Operation Switch (down), Turn off the Motor, Connected to Tubing. (the Pressure Should Not Exceed 63mpa When Air Pressure, in Order to Avoid Damage)
2. Open the Motor After the Pump Connect with the Equipment, and Placed the Operation Valve in Pressurized Position After the Motor Rotates 1-2 Minutes, This Moment the Hydraulic Oil Come into the Cylinder to Perform the Work, and the Output of the Hydraulic Oil Will Increases with the Load on Their Own Booster Until 63mpa.
3. the Oil Pump Regular Working Temperature Between 10℃~50℃,When Find the Oil Temperature≥70 ℃ Should Stop Using After Continuous Working Under High Pressure, Let It Self-cooling Before Use.
4. the Pressure of the Relief Valve and Safety Valve Have Been Set Before the Pump Leave the Factory, the User Can Not Arbitrarily Increase the Pressure,Could Only Reduce It According to the Actual Working Pressure, That Can Improve the Life of the Pump Station.
5. the Motor Must Have Reliable Grounding.

Package Included:
1 X Electric Driven Hydraulic Pump
2 X Oil Hose(1.8m)
2 X Quick Connector