RhinoESC Crawler AM32 80A ESC BEC 5.2~8.2V for RC Car Axial SCX10 TRX-4 MOA USB

EXPLORER 1850KV : 

EXPLORER 2250KV :

Manual:Manual:

Rhino Crawler 80A(one USB Link for free)
This ESC preloaded
AM32 custom firmware. It's optimized for crawler and makes your car run super
smooth and quiet, but it is also suitable for a variety of 1/8 scale or smaller
cars. A built-in adjustable four voltage BEC with a maximum current 10A to apply
the high torque servo. In addition, the e-Switch that comes with it avoids
failures caused by harsh environments.
 
All wires are
pre-soldered.
 
Feature
AM32 custom firmware
Sinewave startup
allows the motor smoothly at ultra-low speeds Variable drive frequency
Low voltage, throttle
loss and stalled rotor protection
High-performance
32-bit MCU
E-switch with long
life and waterproof
Specs
Product Num.: A3100
Battery: 2~8S Lipo
Current: 80A cont.
BEC: max 10A, output
5.2~8.2V adjustable by DIP switch
Waterproof: ESC not
supported / e-switch supported
FAN: not include,
solder pads for power is reserved
Connectors: not include
Wires: battery 14AWGx150mm,
output 14AWGx150mm, signal 250mm and e-switch 120mm
Dimensions: 60x29x15mm
(without wires)
Weigth:57g
 
USB-Link
 
Suitable for a
variety of ESCs, such as AM32/BL32, etc., connect ESC to computer for
configuration or upgrade firmware.
It is portable and easy
to use, just connect the ESC signal plug, connect the USB Type-C cable to the
computer and install the VCP driver.
 
Specs
Product Num.: EUL-01
Wires: not include
Dimensions: 25x13x11mm
 
Package:
1x Crawler80A
1x USB Link