COLONY 25X22 ADA 20G SB TPMT 3H W/DRAIN

1st - the terms and conditions for submitting a review are charmingly fair, well reasoned and understandable. 2nd - The sink is not too thick and not too thin. It is light enough to be handled comfortably by a man trying to install it. Yet heavily built enough such the the deck for faucet fixture is sufficiently rigid to hold faucet still. Enclosed full size template was accurate. Instructions clear. My only “issue” has to do with mounting clips. The bolt/screw is slotted for a straight screwdriver. This leaves a thin sidewall from slot to outside screw diameter. Even a 70 year old duffer like me could accidentally tear the slot out while tensioning the clip. And there is no spare. I would recommend redesigning the screw with a more substantial head and Torx or Hex head opening. (Another point peculiar to my retrofit installation. The clip system is hard or difficult to tension if clip screw is forced to travel at an angle. Clip will want to slip off frame supporting sink. And/or bind preventing sufficient clamping force. For a conventional mounting the clips/clamp system is easy and clever.)