Bak-R25410t Toyota Tundra Rail Mounts Near Top Of Bed Rail; Rails Can Be Lowered Using Drop Down Brackets; With Deck Rail System 6 Ft 6 In Bed Tags: The VORTRAK Hard Retractable Tonneau Cover by BAK Industries Features: Extruded aluminum slats that are a full 1/2" thick. Supports up tp 400 lbs. of evenly distributed weight The slats interlock eliminating a separate hinge mechanism. Interlocking slats improve weather resistance by eliminating gaps. The canister takes up very little bed space and has its own drainage system. Nearly flush fit and Matte Finish blend perfectly with your truck's body lines. Simple clamp-on no-drill installation. Four locking positions- standard fully open and fully closed, and two user-defined. Convenient cable un-locking operation and pull strap closing. and backed by a 2 Year Limited Warranty Engineered to Simply Work Well - The BAK VORTRAK Rolling Tonneau Cover is designed to retract effortlessly and close just as easily along its aluminum rails. With two built-in locking positions, fully opened and fully closed, and an additional two locking positions that you can decide on, you choose how much you need to open your cover. Once closed the rail and seal design provides a highly weather resistant seal and theft security. Any water that makes it through drains into the cover's container and then exits through tubes on each side of the container away from your bed. Latching is completely concealed once your tailgate is closed and latched. If you have a locking tailgate access to the cover becomes very difficult discouraging most would-be thieves. The Beauty is in The Function - The low profile, flush fit, and aerodynamic design doesn't detract from your pickup truck's profile and when opened fully the cover rolls into a low profile container with no reduction in rearward vision. Virtually invisible from the side, its Matte Black Finish blends in with your factory installed bed-rails. Ladder racks, bed side rails, tie downs and other accessories that you install in your truck's stake bed pockets can still be installed with the VORTRAK in place. Just To Be Sure - Bak Industries makes a VORTRAK Retractable Tonneau Covers to fit most all popular pickup truck applications but your actual bed length is necessary to ensure you receive the correct VORTRAX for your truck. With so many different bed lengths available today "Long Bed" and "Short Bed" designations aren't enough. Use our Measuring Your Truck Bed for A Tonneau Cover as a guide or please contactif you are unsure of the proper VORTRAK Cover for your truck. What You Need To Know: Tailgates do not have weather seals installed by the manufacturer in order to allow water to drain from an uncovered truck bed. To further protect your bed contents from water and debris a tailgate seal (available here) is recommended. No drilling into your truck is required for installation All clamps and hardware are included. Do not use liquid or paste wax on your VORTRAK Cover The weather stripping on your cover may absorb soapy residue from a car wash, BAK recommends wiping downthe inside of your rails from time to time. NEVER spray any type of lubricant or cleaner in the rails. This will void the Warranty.If the rails feel sticky, use Paraffin, or candle wax, along the length of the rails. Leonard Truck Accessories is a Direct Distributor of BAK Industries' Products
WARNING: 