Michigan Motorsports .60 14mm Fuel Injector Spacer Extender. Adapts Short LS3 LS7 L92 L99 L76 L98 LS9 LSA Injectors to LS2 Intake or use a Truck Injector on a LS1 Intake.

Fuel Injector Spacer Adapter - Shorty Truck 4.8 5.3 6.0 Injector to LS1 LS6 Intake 

Spacers add .60 to overall length of the Injector

Quantity of 8

This is a fuel injector extender kit. This kit will allow you to adapt the following:

- LS3/LS7/LS9/L76 (1.5") shorty injector in a LS2 (2.1") manifold with the stock fuel rail with no modifications.

 - Delphi Truck 4.8 5.3 6.0 (1.9") injector in a LS1/LS6 (2.5") manifold with the stock fuel rail with no
modifications.  

 - If you raise the fuel rail (with .3 spacer/washer) then It will also allow you to run a Delphi 4.8 5.3 6.0 Truck (1.9") injector
in a LS2 (2.1") manifold with the stock fuel rail. 

The spacers get mounted on the top of the injector. If you were to put them on the bottom,
the spray pattern of the injector would get messed up and the car would not run right.

• Fits most top feed fuel injectors

• Adds 11/16 (.60) inch to the height of the injector

• (outlet) Internal diameter is 0.55 inch and (inlet) external diameter is 0.53 inch. O-ring diameter is 0.58 inch

• Comes with o-rings