Tube bend support is a common pipe fitting. It is used as an auxiliary tool to help the floor heating pipes quickly bend and shape. Prevent floor heating pipes from twisting, shrinking, or loosening and falling off; increasing the reliability and security of floor heating. Suitable for copper, PEX pipes and other pipe connections.
Advantage
Galvanized material, strong and durable, and good load-bearing. Using a bend support to install pipes can avoid scratches during the installation process, improve the reliability of floor heating pipes, and increase the service life of floor heating.
When impacted by high-pressure water flow, the floor heating pipe bender can prevent the interface between the floor heating pipe and the water distributor from loosening.
It can bend floor heating pipes into reliable shapes, is highly practical, can greatly reduce construction difficulty and work intensity, and improves work efficiency.
Instruction
1. Prepare the floor heating pipe that needs to be bent, and place it flat on the work surface to keep it stable and not slipping.
2. Put the pipe into the opening at the rear of the bend support until a section of the pipe is exposed. At this time, both ends of the pipe should be outside the clamping opening of the bend support.
3. Adjust the position of the pipe so that it is within the appropriate bending range, and then fix it with springs on both sides.
NOTE:
Please confirm the diameter of the installation pipe before purchasing.
WARNING: 