Description:
The oard v1.1 is a and powerful electronics development board that runs MicroPython. It your PC over USB, a USB flash Python scripts, and a serial Python prompt (a REPL) for instant progming. Requires a micro USB cable.
MicroPython is a complete Python (version 3.4) progming language so that it runs on a . It includes many optimisations so that it runs efficiently and uses very . MicroPython runs - the oard, and essentially gives you a Python operating system. The built-in module contains functions and classes to control the peripherals available on the board, such , I2C, , ADC and
Differences between v1.0 and v1.1: high-speed crystal changed from 8MHz to 12MHz; LDO changed from MCP1802 to MCP1703; USB power repled with silicon ; JST battery connector pads added with protection FET.
Specification:
STM32F405RG
168 MHz Cortex CPU with hardware floating point
1024KiB and 192KiB
Micro USB connector for power and serial communication
Micro card slot, supporting standard and high capity cards
3- celerometer (MMA7660)
Real time clock with optional battery bkup
24 GPIO on left and right edges and 5 GPIO on bottom row, and switch GPIO available on bottom row
3x 12-bit analog to digital converters, available on 16 pins, 4 with analog ground ing
2x 12-bit digital to analog (D) converters, available on pins X5 and
4 LEDs (red, green, yellow )
1 reset and 1 user switch
3.3V LDO voltage regulator, capable of supplying up to 250mA, input voltage range 3.6V to 16V
DFU bootloader for easy upgrading of
The two mounting tabs on the oard have perforations so that you can snap cleanly if needed
Pkage Includes:
1 Piece MicroPython oard v1.1 Powerful Electronics Development Board
Note: The color of the USB Cable is random (White or blk)
