Intercom Glue, Ecostick 9015STHV, Medium Strength, Water Based Adhesive

Intercom Glue, Ecostick 9015STHV, Medium Strength, Water Based Adhesive

Buckleguy is the USA distributor for Intercom Srl, an Italian company that manufacturers water based leather glues, adhesives, and spray machines to apply it. Ecostick 1804 and 9015STHV are the core glues for leatherworkers, shoe factories, and manufacturers for simple craft use, up to full scale production.

Glue: Ecostick 9015STHV

Data Sheets:

• Download 9015STHV MSDS (Material Safety Data Sheet)
• Download 9015STHV TDS (Technical Data Sheet)

Ecostick 1804 vs 9015STHV

• 9015STHV
• Strength: Medium. Ideal for stitched goods, where the glue couples and prepares two sides before stitching.
• Uses: Ideal for coupling and folding leather, hybrid leather, fabrics, canvas, cardboard. Great in the production of belts, shoe uppers, bags, wallets, heels, insoles, and more.
• Open Time: 2-4 hours
• Once glue is applied you have ~4 hours of sticky, cold bonding. After 4 hours you can reactivate glue for 8-10 seconds at 60°-70° Celsius (140°-160° Fahrenheit). Reactivation can be done for up to 48 hours.
• Color: Clear transparent. Over time glue will slightly yellow.
• Instructions for use: Apply the adhesive to both sides. Let dry until the film of the adhesive becomes transparent. If more then 4 hours go by, reactivate glue at 60°-70° Celsius (140°-160° Fahrenheit) couple and press together. Final strength reached at ~4 days.
• Application tools: Can be sprayed with a spray machine or applied by a brush or spatula.

• 1804
• Strength: High. Ideal for permanent bonding. No stitching required. Better performance on oily leathers and difficult materials.
• Uses: Ideal for coupling and folding leather, hybrid leather, fabrics, canvas, cardboard, for gluing EVA, nylon, PVC, rubber, greasy leather with grease level up to 15%. Great where no stitching is required.
• Open Time: 30 minutes
• Once glue is applied you have 30 minutes of sticky, cold bonding. After 30 minutes you can reactivate glue for 8-10 seconds at 60°-70° Celsius (140°-160° Fahrenheit). Reactivation can be done for up to 48 hours.
• Color: Clear transparent. Even with aging the glue does not turn yellow, remains transparent. Therefore, it is recommended on lighter color materials.
• Instructions for use: Apply the adhesive on both sides. For cold bonding, let dry for ~20 minutes then couple both sides and press together. If more then 20 minutes go by, reactivate glue at 60°-70° Celsius (140°-160° Fahrenheit), then couple and press together. Final strength reached at ~4 days.
• Application tools: Can be sprayed with a spray machine or applied by a brush or spatula.