Miumaeov Commercial Hot Melt Glue Spray Injecting Machine 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries

Hero image 0 of Miumaeov Commercial Hot Melt Glue Spray Injecting Machine 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries, 0 of 9

Miumaeov

Miumaeov Commercial Hot Melt Glue Spray Injecting Machine 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries

Name: Miumaeov Commercial Hot Melt Glue Spray Injecting Machine 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries
Brand: Miumaeov
SKU: 5155508314
Price: 302.86 USD
Availability: InStock

(No ratings yet)

Key item features

Specification

Model: X001
Power: 900W
Sol Speed: 3KG/HR
Solvent Capacity: 3KG/HR
Maximum Viscosity; 10000 CPS
Working Temperature: 160-180°C
Temperature Control Range: 0-300°C

Safety Precaution

Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive.
1. The gas circuit should avoid too much water vapor entering
2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.
3.The maximum total air pressure is set to 4KG
4. Before heating the melted glue, the pressure of the storage bucket must be released first.

Preparation for Operation

1. Confirm the safety protection measures
2. Check if the machine is 110VAC and there is no fluctuation in the pressure
3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)
5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.
6. Check if the air supply system is basically dry and the air pressure is stable
7. Power on and test the circuit of each part.

Boot Steps

1. Connect the power and turn the power switch to ON
2. Check if the temperature of the temperature controller is within the above range
3. Check whether the pressure relief is turned in the direction of pressure holding
4. Connect the origin, set the pressure value, and start the operation

Specs

Power type
Corded Electric
Brand
Miumaeov
Has written warranty
No
Model
X001
Volts
110 V
Watts
900 Watts

Current price is $302.86

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives between May 2 - May 5

Sold and shipped by Colorfullrain

3.617391304347826 stars out of 5, based on 115 seller reviews(3.6)

Report an issue with this seller

Free 30-day returns

About this item

Product details

This high-quality hot melt glue gun can be widely used for bonding, fixing, wiring, and insulating toys, decorations, small home appliances, handicrafts, electronic components, and so on. It has stable and superior performance and is a good helper for DIY design.

This commercial hot melt glue gun is made of high-quality materials with a sturdy and durable appearance, good impact resistance, and heat dissipation. With stable and superior performance, it is a good helper for DIY design.

Note: When using this machine, please be sure to wear safety gloves, goggles, and long-sleeved overalls to avoid being scalded by the high-temperature hot melt adhesive solution; Before adding hot melt adhesive, the tank pressure must be released; The maximum total air pressure is set at 4KG; The air path should avoid excessive water vapor; The glue capacity of the hot melt adhesive should not be more than 7 minutes of the tank capacity.

Package Included

1* Hot Melt Glue Dispenser

1* Pedal Switch

1* Conversion Plug

1* Pressure Gauge

Specification

Model: X001
Power: 900W
Sol Speed: 3KG/HR
Solvent Capacity: 3KG/HR
Maximum Viscosity; 10000 CPS
Working Temperature: 160-180°C
Temperature Control Range: 0-300°C

Safety Precaution

Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive.
1. The gas circuit should avoid too much water vapor entering
2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.
3.The maximum total air pressure is set to 4KG
4. Before heating the melted glue, the pressure of the storage bucket must be released first.

Preparation for Operation

1. Confirm the safety protection measures
2. Check if the machine is 110VAC and there is no fluctuation in the pressure
3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)
5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.
6. Check if the air supply system is basically dry and the air pressure is stable
7. Power on and test the circuit of each part.

Boot Steps

1. Connect the power and turn the power switch to ON
2. Check if the temperature of the temperature controller is within the above range
3. Check whether the pressure relief is turned in the direction of pressure holding
4. Connect the origin, set the pressure value, and start the operation

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Power type

Corded Electric

Brand

Miumaeov

Items included

1*Hot Melt Glue Dispenser\n1* Pedal Switch\n1* Conversion Plug\n1* Pressure Gauge

Has written warranty

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.