Loyalheartdy 12HP 2 Stroke Outboard Motor 169CC Heavy Duty Kayak Engine Long Axis Tiller Control w/Water Cooling CDI for Fishing Boat Motor Boat 5500Rpm

Please kindly noted that this item is sold by GOJOY from Joybuy marketplace.

Gear Oil Filling Method

There is a screw on the gearbox, unscrew the screw to add gear oil. Each machine will be filled with gear oil before leaving the factory, so it does not need to be refilled when it is used for the first time. After that, add according to personal use, and check every ten hours.

Specification

• Material: Aluminum Alloy
• Color: Black
• Model: 12HP Horsepower Long Axis
• Displacement: 169CC
• Gear Ratio: 2.08 (27:13)
• Number of Cylinders: 2
• Speed: 4500-5500RPM
• Gear: F-N-R
• Refueling Method: 92 Unleaded Gasoline is Recommended
• Maximum Power: 8.8kw
• Oil Tank Capacity: 24L/6.34gal
• Endurance: 5-6h
• Max. Load-bearing Capacity: 1000kg/2204lbs
• Ignition System: CDI
• Cooling System: Water Cooling
• Control System: Tiller Control
• Start System: Manual Start
• Suitable Stern Plate Height: 45cm-55cm/17.7*21.7in
• Propeller Specification: 23.5cm/9.25in (Length) * 20.3cm/8in (Diameter)
• Cylinder Diameter * Stroke: 50mm/2in * 43mm/1.7in
• Recommended Engine Oil: 2 Stroke Engine Oil
• Mixing Ratio: Fuel: Oil = 50:1
• Trim and Tilt System: Manual Tilt
• Net Weight: 32kg/70.5lbs
• Gross Weight: 34kg/75lbs
• Package Size: 70.5*37.5*120cm/27.8*14.8*47.2in
• Product Size: 87.3*33.2*104cm/34.4*13.1*40.9in

Package Included

1x Outboard Motor

1x Flameout Rope

1x Oil Pipe

1x Sealing Ring

1x Paper Pad

1x Spark Plug

1x Start Rope

1x Water Pump Impeller

1x Cotter Pin

1x Fuel Tank

1x English Manual

Other Tools

Notes

1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil.

2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1.

3. After the running-in period, the volume ratio of gasoline and oil is 50:1.

4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank.

5. The outboard motor must be started in water, do not start the engine on shore.

6. Loosen the vent screw on the fuel tank cover counterclockwise when starting.

7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt.

8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator.

9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months.