2 Port PCI Express Super Speed 1 Internal 1 External USB 3.0 Card

The PCI Express USB 3.0 Card lets you add one internal and one external USB 3.0 port to your PC through a PCI Express slot.

Featuring a native NEC PCI Express host controller chipset, the new USB 3.0 standard supports transfer rates of up to 5Gbps, while still providing backward compatibility with older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices. The inclusion of an internal USB 3.0 connection provides the added benefit of compatibility with USB 3.0-based internal storage solutions or front-bay hubs.

For bus-powered USB devices, this PCIe USB 3.0 card includes an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.0 devices (500mA for USB 2.0).

UASP is supported in Windows 8, Server 2012 and Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.

• Bus Type: PCI Express
• Card Type: Standard Profile (LP bracket incl.)
• Interface: USB 3.0
• Ports: 2
• MTBF: 11,914 Hours
• Type and Rate: USB 3.0 - 5 Gbit/s
• UASP Support: Yes
• Connector Type(s): 1 - PCI Express x1 Male
• External Ports: 1 - USB Type-A (9 pin) USB 3.0 Female
• Internal Ports: 1 - SATA Power (15 pin) Plug
• Humidity: 0~85% RH
• Operating Temperature: 0 degreeC to 50 degreeC (32 degreeF to 122 degreeF)
• Storage Temperature: -20 degreeC to 60 degreeC (-4 degreeF to 140 degreeF)
• Height: 0.8 in. (20 mm)
• Length: 2.8 in. (70 mm)
• Width: 4.7 in. (120 mm)
• Weight: 0.4 lbs

• Provides both internal and external USB 3.0 connections
• Optional SATA power connector for up to 900mA per port output
• Fully compliant with USB 3.0 revision 1.0 specifications and Intel xHCI rev0.96 specifications
• UASP support for more efficient data transfer
• PCI Express 2.0 Compliant
• Supports USB transfer speeds of 5Gbps (Super Speed), 480Mbps (High Speed), 12Mbps (Full Speed), and 1.5Mbps (Low Speed)
• Backward compatible with previous USB standards
• USB ports are Hot Swapping and Plug-and-Play compliant
• Supports PCI Bus Power Management Interface Specification revision 1.2
• Fully supports the following USB Communication Types - Control/Bulk/Interrupt/Isochronous Transfer
• 2 Port PCI Express Super Speed 1 Internal 1 External USB 3.0 Card

• 1 - PCI Express USB 3.0 card