2.5 in. Skt Cross

2.5 in. Skt Cross is made from ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds. It is designed according to ASTM D-2466 - Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40. This cross also meets the specifications of ASTM F-1970 for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) systems. The Schedule 40 Fittings are produced from PVC Type 1, Cell Classification 12454-B, while the O-rings are made from a Buna-N (Nitrile) material. This product is listed under NSF/ANSI Standard 61, Annex G Drinking Water System Components Weighted average lead content. Please note that it is not suitable for use in the Hot or Cold water distribution system in a dwelling with a maximum service temperature of 140°F. It is important not to use fittings for compressed air or gases, and not to test PVC piping systems with compressed air or gases. Additionally, do not use fittings with liquids not recommended by .

• Size: 2.5 in.

• ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
• ASTM D-2466 - Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
• ASTM F-1970 - Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) systems
• Material - Schedule 40 Fittings are produced from PVC Type 1, Cell Classification 12454-B. O-rings are produced from a Buna-N (Nitrile) material
• Listings - NSF/ANSI Standard 61, Annex G Drinking Water System Components Weighted average lead content
• Not to be used in the Hot or Cold water distribution system in a dwelling. Maximum Service Temperature 140°F
• Do not use fittings for compressed air or gases
• Do not test PVC piping systems with compressed air or gases
• Do not use fittings with liquids not recommended by