🔴 Cast Iron Ingot Combination Wires and Bar Plate Mold Open Cavity Double Sided A-1
🟢 Cast Iron Ingot Combination Mold
🟢 3 Grooves and Plate
🟢 Open Cavity Double Sided Ingot
🟢 4 Cavities Machined Ingot Mold
🟢 3 Wire Grooves and Plate / Bar for Gold – Silver
🟢 Ingot Mold is made with Grey Cast iron, machined clean surface and smooth pockets for wires and bar plate, open cavity mold.
🟢 Ingot is made for use with Gold Silver Copper
🟢 The cast iron mold can be used in making rods for wire rolling and for flat bar stock.
🟢 Ingot is for use with non-ferrous metals, made for precious metals like Gold, Silver as well as Copper and more
🔴 Note: SALE is for 1 Ingot ... The first 3 pictures show 2 of the same ingots to see and visualize all 4 cavities - both sides of the ingot.
🟢 Mold has 4 cavities, weights are based on Gold, and the weights listed below are approximate.
🟢 The weight of the rods and bar will depend on the metal being used, the karat you’re working with, and how fully you fill the cavity.
🔴 Note: This is for the Professional Smelter - Never Overheat Ingot, especially in repeated melts and pours, use Oil or Wax before pouring molten metals
🔻 SPECIFICATION: JETS Product # 0318-20233 🔻
🔸 Overall Measurement: 12-3/8" x 1-11/16" x 1" with Handle
🔸 Body of Ingot Measures: 8-5/8" x 1-11/16" x 1"
🔻 Mold Cavities Size and Capacity: 🔻
🔸 1st Wire Groove Cavity 8x8x200mm - 240Gram – 7.7Toz
🔸 2nd Wire Groove Cavity 8x8x200mm - 240Gram – 7.7Toz
🔸 3rd Wire Groove Cavity 6x6x200mm - 130Gram – 4.2Toz
🔸 4th Plate Bar Cavity 8 x 30 x 200mm - 1000Gram – 32.15Toz
🔸 Ingot Weight: 3 Lb. – 1.4 Kg
