BXW0650 600 lbs TrackPro Weight Distribution Hitch with 7 Hole Shank

The TrackPro is a revolutionary hitch that not only handles weight distribution but sway prevention as well by using the combination of loaded spring bars, friction L brackets and an integrated hitch head. As the trailer tries to sway it puts a heavier load on one side of the bars, as this happens the spring bars will pivot on the hitch head and balance load working with the friction L brackets to prevent and control trailer sway. The TrackPro will also conquer weight distribution at the same time, putting more weight on the towing vehicles front tires which increases steering control and braking giving you a safer and easier driving experience. Any unauthorized modifications to your TrackPro may void the . The BXW0650 kit includes: 1 Hitch Head, 1 7 Hole Shank, 1 2" x 7.5K Rated Chrome Hitch Ball, 1 Driver Side L Bracket Kit, 1 Passenger Side L Bracket Kit, 2 600 lb. Spring Bars, 1 Spring Bar Lift Tool Plate, 1 Spacer Tube, 2 Hex Bolts, 2 Hex Nuts, 2 Lock Washers, and 2 Spring Lock Pins.

• Evenly distributes trailer tongue weight to the tow vehicle
• Sway prevention provided by caster in the hitch head and sway control by additional points of friction, backup without disconnecting
• Built In Sway Prevention Never Stops Working, Even In Rain Or Snow
• TrackPro's Sway Prevention Is Provided By Caster In The Hitch Head And Sway Control By Additional Points Of Friction
• The Powder Coat Finish Provides A Professional Appearance, Aids In Rust Prevention, And Prolongs The Life Of The Product
• Due To The Preset Pitch Of The Hitch Head There Are Not Additional Adjustments Needed After Initial Product Set-up
• Grease Is Captured Inside The Bar Pivots. No Messy Bars To Deal With

• Finish: Powder Coated
• Item Height: 16 in.
• Length: 7 in.
• Width: 12 in.
• Material: Steel
• Shank: 7 Hole
• Capacity: 600 lbs
• Ball: 2 in.
• Weight: 95 lbs