“Y” Mixer Hose, Mix Hot and Cold Water, 1ft Washer Braided Rubber Inlet Hose ¾” with Brass Couplings

Water inlet mixer hose, transfers water securely from cold water supply to cold and hot water washing machine inlets. This “Y” hose come with steel-plated couplings with brass stems on each female end and steel-plated fitting on male end. Rubber gaskets provided on female ends. Specifications: This hose stands up to 900 PSI and will not conduct electricity. Working temperature : 0° F - 190° F. -Heat resistance -Pressure resistance -Anti-corrosive -Extremely flexible -It maintains an optimum flow Material: The hose has three layers: One extra strong layer of heavy-duty rubber, one layer of 1/4" high tenacity braid polyester that is chemically bonded, the outside layer is thermoplastic polyurethane. Product dimensions: 1 feet (12 inches) length of each "Y" leg. NPT Nominal diameter: ¾” diameter female threads on both “Y” ends and ¾” NPT male on the other end. Easy installation: Make sure supply taps are turned OFF. 1. Remove old hoses from supply tap. 2. Hand-tighten your new mixer hose onto the supply tap. 3. Give another ¼ turn with a pair of pliers. 4. Locate water inlets on your washing machine. 5. Hand-tighten female ends of mix hose onto your washer water inlets. 6. Then give another ¼ turn each with a pair of pliers. Turn ON your supply tap.