Hero image 0 of Timpano Compact 1 Channel TPT500 2 Ohms Car Audio Amplifier – 1x 500 Watts at 2 Ohm – Mini Stereo 12 volts Fullrange Class D Amp, 0 of 5
Timpano Compact 1 Channel TPT500 2 Ohms Car Audio Amplifier – 1x 500 Watts at 2 Ohm – Mini Stereo 12 volts Fullrange Class D Amp
(No ratings yet)
Key item features
- COMPACT DESIGN: Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 3.93″ depth x 5.02″ width x 2″ height POWER: This amplifier is designed to run your system with the power it needs to perform! 500 Watts maximum dynamic RMS power output on one channel. Its high efficiency rate of 85% provides more power with less battery consumption. HIGH LEVEL INPUTS with SIGNAL AUTO TURN ON: Attaches directly to systems using speaker-level inputs with signal auto turn-on to eliminate remote turn-on wiring TECHNOLOGY: A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 10 to 22,000Hz was used to give the best sound reproduction on this tiny amplifier. FEATURES: Heavy Duty 10 Gauge power and speaker wire Inputs. Built-in crossover filters for easy tuning! Built-in variable crossover filters: HPF ( 10 – 700Hz ) and LPF ( 60 – 22 KHz ). It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.
- Additional Information: Number of Channels: 1 Max Dynamic Output: 500 Watts RMS 2 Ohm 380 Watts RMS Power at 2 Ohm 12.6 Volts 150 Watts RMS Power at 4 Ohm 12.6 Volts Supply Voltage: 10 ~ 15V Frequency Response: 10Hz ~ 22KHz LPF – Crossover Low Pass: 60Hz to 22,000 Hz HPF – Crossover High Pass: 10Hz to 700 Hz Signal to Noise: > 90 dB Harmonic Distortion: < 0.9 % THD Input Impedance: 10K Ohm with RCA and 38K Ohm with Wires Impedance Output: 2 Ohm Consumption with Signal Musical: 1A ~ 18A Dimensions (L x W x H): 3.93” x 5.02” x 2” Weight: 1.12 Lbs
- Before Installing: You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines: • Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier; • Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; • Always use 100% Copper cables and good quality connectors. This guarantees the sound’s quality and fidelity; • To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a fuse 12 inches away from the battery as a safety precaution
Specs
- BrandTimpano
- Rms power rating500 W
- Channels1
- Impedance2 ohm
- FeaturesCompact
- Peak audio power handling500 W
Current price is USD$74.95
Price when purchased online
Out of stock
How do you want your item?
Out of stock
About this item
Product details
Small Footprint Technology! Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact fullrange amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 80-90% in a compact Class D full range amplifier.
- COMPACT DESIGN: Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 3.93″ depth x 5.02″ width x 2″ height POWER: This amplifier is designed to run your system with the power it needs to perform! 500 Watts maximum dynamic RMS power output on one channel. Its high efficiency rate of 85% provides more power with less battery consumption. HIGH LEVEL INPUTS with SIGNAL AUTO TURN ON: Attaches directly to systems using speaker-level inputs with signal auto turn-on to eliminate remote turn-on wiring TECHNOLOGY: A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 10 to 22,000Hz was used to give the best sound reproduction on this tiny amplifier. FEATURES: Heavy Duty 10 Gauge power and speaker wire Inputs. Built-in crossover filters for easy tuning! Built-in variable crossover filters: HPF ( 10 – 700Hz ) and LPF ( 60 – 22 KHz ). It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.
- Additional Information: Number of Channels: 1 Max Dynamic Output: 500 Watts RMS 2 Ohm 380 Watts RMS Power at 2 Ohm 12.6 Volts 150 Watts RMS Power at 4 Ohm 12.6 Volts Supply Voltage: 10 ~ 15V Frequency Response: 10Hz ~ 22KHz LPF – Crossover Low Pass: 60Hz to 22,000 Hz HPF – Crossover High Pass: 10Hz to 700 Hz Signal to Noise: > 90 dB Harmonic Distortion: < 0.9 % THD Input Impedance: 10K Ohm with RCA and 38K Ohm with Wires Impedance Output: 2 Ohm Consumption with Signal Musical: 1A ~ 18A Dimensions (L x W x H): 3.93” x 5.02” x 2” Weight: 1.12 Lbs
- Before Installing: You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines: • Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier; • Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; • Always use 100% Copper cables and good quality connectors. This guarantees the sound’s quality and fidelity; • To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a fuse 12 inches away from the battery as a safety precaution
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.
Specifications
Brand
Timpano
Rms power rating
500 W
Channels
1
Impedance
2 ohm
Warranty
Warranty information
PRV Audio Limited Component Warranty PRV Audio warrants that all new Speakers, Tweeters, Compression Drivers and repair kits are free from any manufacturing defects in materials or workmanship under normal usage for a period not to exceed (1) year from the original purchase date. That is, the date the speaker leaves the PRV Audio warehouse. This warranty is valid for the original purchaser and is not transferrable. Be prepared to provide receipt of purchase if requested. If for any reason service is needed to be performed under this warranty, PRV Audio will repair or replace the defective equipment to be returned functioning. If the speakers were working, then suddenly stopped playing or started to make noise, there is a good chance the voice coil has become damaged. This can happen in many ways but in any case, it is not covered under warranty. The warranty will only cover manufacturing issues. All speakers believed to be defective must be sent back for our review to verify any manufacturing defects. How to return your component for warranty review In the event you need to return your PRV Audio speaker for review you must first obtain a Return Authorization (RA) number. Complete the form below in its entirety. Once the information for the RA request has been received, we will send a reply with instructions to send the defective speaker for warranty repair, providing it is still within the warranty period. Please be sure to diagnose your speaker thoroughly. Speakers found to have no defects may be charged return shipping. Pack the speaker very well to prevent shipping damage. Write your assigned RA number on the outside of the shipping box for identification purposes. If the voice coil is found to be damaged you will be responsible for purchasing a repair kit, repair fee and or return shipping costs. If no repair kit is available for your product a new product will need to be purchased. If there is no issue found, you may be responsible for return shipping. What is not covered under this warranty Burned voice coils from overheating or DC voltage. Broken speaker baskets. Broken or creased cones due to abuse or other physical damage. Damaged dust caps. Broken diaphragms from low frequency. Previously reconed speakers. Broken speaker terminals. Complete speaker destruction. Fire damage, water damage, lightning strikes or other Acts of God. Excessive excursion causing damage to voice coil former, damage to cone or spider suspension, damage to diaphragms from contacting the phase plug. Return shipping costs for speakers found to be functioning properly. Shipping costs to send the speakers for warranty review. Speakers returned without prior authorization. Warranty claims are normally processed within (1) week providing that products and or parts are available to perform necessary repairs in a timely manner.
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Warranty url
Warnings
WARNING: California Prop 65 Warning Cancer and Reproductive Harm.Similar items you might like
Based on what customers bought
Rollback Jensen XDA91RB Class-D Mono Amplifier with 240 Watts x 1 RMS,1200 Watts Peak Power, New $86.26 Was $98.00
Rollback
$8626current price $86.26, Was $98.00$98.00Jensen XDA91RB Class-D Mono Amplifier with 240 Watts x 1 RMS,1200 Watts Peak Power, New
2113.9 out of 5 Stars. 211 reviewsBest seller Power Acoustik RZR4-1500D 4-Channel Amplifier, Class D Full Range Amp, 1500W Max with SMT Circuitry (New) $98.97
Best seller
$9897current price $98.97Power Acoustik RZR4-1500D 4-Channel Amplifier, Class D Full Range Amp, 1500W Max with SMT Circuitry (New)
963.8 out of 5 Stars. 96 reviewsBest seller Power Acoustik RZR1-2500D Amplifier, Razor Series Subwoofer 1-Channel Amplifier, 2 Ohm Stable 2,500 Watt Max (New) $109.96
Best seller
$10996current price $109.96Power Acoustik RZR1-2500D Amplifier, Razor Series Subwoofer 1-Channel Amplifier, 2 Ohm Stable 2,500 Watt Max (New)
7634.1 out of 5 Stars. 763 reviewsBest seller Taramps TS 400x4 400 watts RMS 4 Channels Full Range Car Audio Amplifier, 2 Bridged Channels, RCA Input Class D, Output Power, Multichannel Amplifier System, Small $49.95 Was $59.95
Best seller
$4995current price $49.95, Was $59.95$59.95Taramps TS 400x4 400 watts RMS 4 Channels Full Range Car Audio Amplifier, 2 Bridged Channels, RCA Input Class D, Output Power, Multichannel Amplifier System, Small
294.3 out of 5 Stars. 29 reviewsPecham 3800W 4 Channel Car Amplifier, Digital Car Amplifier Stereo Class A/B Amp Audio with 2/4 Ohm Stable, Adjustable Low/High Pass, Bass Boost $79.99 Was $159.99
$7999current price $79.99, Was $159.99$159.99Pecham 3800W 4 Channel Car Amplifier, Digital Car Amplifier Stereo Class A/B Amp Audio with 2/4 Ohm Stable, Adjustable Low/High Pass, Bass Boost
193.1 out of 5 Stars. 19 reviewsSingle Channel Amplificador Class D Digital Car Amplifier 600W High-Power Car Amplifier Car Audio Modification K-600.1D $87.76
$8776current price $87.76Single Channel Amplificador Class D Digital Car Amplifier 600W High-Power Car Amplifier Car Audio Modification K-600.1D
4 Channel Amplifier Car Audio 4 x 125 Watts 2 Ohm, TPT-500.4 Small 4 Channel Amp12 Volts Full Range Class D Mini Bridgeable Car 4 Channel $66.99
$6699current price $66.994 Channel Amplifier Car Audio 4 x 125 Watts 2 Ohm, TPT-500.4 Small 4 Channel Amp12 Volts Full Range Class D Mini Bridgeable Car 4 Channel
LineYDI 5800W Watt 4 Channel Car Truck Amplifier Stereo Audio Amp Speaker System Device $50.99
$5099current price $50.99LineYDI 5800W Watt 4 Channel Car Truck Amplifier Stereo Audio Amp Speaker System Device
15 out of 5 Stars. 1 reviewsVertigo Series 1,600w Class D Monoblock Amplifier, VA1-1600D $54.90
$5490current price $54.90Vertigo Series 1,600w Class D Monoblock Amplifier, VA1-1600D
153.7 out of 5 Stars. 15 reviewsKFFKFF 4 Channel Car Audio Amplifier, 2 Ohm Stable, Bridgeable Class D Full Range Amp, Max Power 4 x 272W @ 4 Ohm / 4 x 400W @ 2 Ohm for Vehicles $62.99
$6299current price $62.99KFFKFF 4 Channel Car Audio Amplifier, 2 Ohm Stable, Bridgeable Class D Full Range Amp, Max Power 4 x 272W @ 4 Ohm / 4 x 400W @ 2 Ohm for Vehicles
Rockville RVA600.1 1200w Peak 4Ohm Stable Mono Amplifier Amp Kit $79.95
$7995current price $79.95Rockville RVA600.1 1200w Peak 4Ohm Stable Mono Amplifier Amp Kit
63.8 out of 5 Stars. 6 reviewsRockville dB10 800w Peak Mono Car Audio Amplifier 200w RMS @ 4 Ohms $79.95
$7995current price $79.95Rockville dB10 800w Peak Mono Car Audio Amplifier 200w RMS @ 4 Ohms
23 out of 5 Stars. 2 reviewsBlaupunkt 3000 Watts Monoblock Amplifier - AMP3000D $132.43
$13243current price $132.43Blaupunkt 3000 Watts Monoblock Amplifier - AMP3000D
254.3 out of 5 Stars. 25 reviewsVertigo Series 1,800w 4ch Full Range Amplifier, VA4-1800D $73.10
$7310current price $73.10Vertigo Series 1,800w 4ch Full Range Amplifier, VA4-1800D
313.6 out of 5 Stars. 31 reviewsCrunch GP-1500.2 1500w 2 Channel Car Amplifier Bridgeable Stereo Amp Wire Kit $78.95
$7895current price $78.95Crunch GP-1500.2 1500w 2 Channel Car Amplifier Bridgeable Stereo Amp Wire Kit
74.4 out of 5 Stars. 7 reviewsPRV Audio QS400.4 2 Ohm Mini Compact 4 Channel Car Audio Amplifier 4 x 100 Watts RMS at 2 Ohm - 400 Watt Amp Stereo 12 Volts Amp Class D Full Range Bridgeable $75.00
$7500current price $75.00PRV Audio QS400.4 2 Ohm Mini Compact 4 Channel Car Audio Amplifier 4 x 100 Watts RMS at 2 Ohm - 400 Watt Amp Stereo 12 Volts Amp Class D Full Range Bridgeable
Power Acoustik OD1-3000 1-Channel Class A/B 3000W Monoblock Vehicle Car Amplifier, Multicolor $93.99
$9399current price $93.99Power Acoustik OD1-3000 1-Channel Class A/B 3000W Monoblock Vehicle Car Amplifier, Multicolor
203.6 out of 5 Stars. 20 reviewsTPT-500.4 2 Ohms - Timpano Compact 4 Channel Car Audio Amplifier – 4x 125 Watts at 2 Ohm $86.16
$8616current price $86.16TPT-500.4 2 Ohms - Timpano Compact 4 Channel Car Audio Amplifier – 4x 125 Watts at 2 Ohm
3800W High Power Car Sound Amplifier 2-Channel Car 12V Amplifier Stereo Car Audio Receiver for Car Audio Modification $51.55
$5155current price $51.553800W High Power Car Sound Amplifier 2-Channel Car 12V Amplifier Stereo Car Audio Receiver for Car Audio Modification
11 out of 5 Stars. 1 reviewsBlaupunkt BPA404MI Micro 4-Channel Car Amplifier – 420W RMS / 1000W Max, Compact High-Performance Amp $75.71 Was $149.00
$7571current price $75.71, Was $149.00$149.00Blaupunkt BPA404MI Micro 4-Channel Car Amplifier – 420W RMS / 1000W Max, Compact High-Performance Amp
Customer ratings & reviews
0 ratings|0 reviews
This item does not have any reviews yet
