RockJocks forged Johnny Joint for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2.5 inch diameter, fitted with a zerk fitting for greasing, 2.25 inch of 1.25 inch -12 left hand threads on the shank, and a 2.365 inch mounting width ball with a 0.562 inch thru bolt hole. Finished in gold zinc plating.
Features - 1 1/4 in-12 LH Threaded Shank
- Externally greased
- External zerk fitting located on joint body
Specifications - Body Finish: Yellow zinc plating
- Body Width: 2 in.
- Thread Size: 1 1/4 inch, 12 TPI
- Thread Direction: Left hand
- Shank Length: 3 1/4 in.
- Mount Width: 2.365 in.
- Hole Diameter: 0.5625 inch (9/16, 14mm)
- Misalignment: 23° Total
- Diameter: 2.5 in.
- Country of Origin: USA
- Hand Type: Left Hand
- Weight: 2 lbs
- SKU: MYRD1894984
WARNING: 