Miumaeov 13 GPM Hydraulic Log Splitter Pump Hi Lo Gear Pump 3000PSI 2 Stage 1/2" Shaft Wood Processor

The HI/LO section of the pump is all aluminum and the end plates are cast steel. Good abrasion resistance, durable.
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters.
Equipped with 1/2" pump shaft, the log separator is compatible with horizontal and vertical shaft engines. It greatly reduces the difficult-to-solve problems when replacing and operating products.

Packing Include:
1 * 13 GPM Hydraulic Log Splitter Pump
13GPM Hydraulic Log Splitter Pump
This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters.
The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements.
 
Specifications:
Shaft: ½""
Inlet port: 150mm; Outlet port: 230mm
Maximum pressure: 3000 PSI
Bolt circle: 2.83in
Mounting hole diameter: 344in
Woodruff key: 1/8in
Rotation is clockwise
4 holes spaced 2"" on center
Features:
Minimum 8 HP or larger gas engine

For use with open center hydraulic systems only
Widely Application:

Very suitable for power devices of fellers, presses, machine tools, and snowplows. 
 
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine.  Excellent for use on log splitters.  85% efficient.
Suggested applications: Presses, Log Splitters, Clamping Units and Compacto
 
Specifications:
New Hydraulic Log Splitter Pump 13 GPM
Shaft: ½"
Inlet port: 150mm
Outlet port: 230mm
Minimum 8 HP or larger gas engine.
For use with open center hydraulic systems only
Maximum pressure: 3000 PSI
Bolt circle: 2.83in.
4 holes spaced 2" on center
Mounting hole diameter: 344in
Woodruff key: 1/8in
Rotation is clockwise
This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient.
The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements.
 
Packing Include:
1 PC 13 GPM Hydraulic Log Splitter Pump