Teissuly DIY Polymorph Thermoplastic Polycaprolactone Moldable Plastic Pellet 50g

Teissuly DIY Polymorph Thermoplastic Polycaprolactone Moldable Plastic Pellet 50g
Specification:
Good dissolubility
High crystallinity and low melting point
Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C.
Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.
1. Simply heat the pellets in water to over 42°C (Needs water that's been boiled).
2. Leave the pellets to melt in the water until they turn transparent.
3. the pellets from the water and mould by hand (add color at this stage if required)
4. Allow the polymorph to cool until.
5. Re-heat if further molding is required.
Warning:
1. Never heat polymorph over 200 ºC as this will damage the polymer.
2. Wait around 5 min it cools down before you reheat and reshape it again.
3. Do not . Contact if swallowed.
4. Product should be ok to use for children 10+
5. Product may become hot.
Material: Polycaprolactone
Size: 4mm
Color: White
Package Include:
1 Bag polymorph Thermoplastic