SprayMax 2 Part, Rapid Primer Filler, Non IsocyanateProduct expires approximately 36 months after the manufacturer date on the canOnce activated, the potlife is apprximately 24 hoursThis is a rapid primer filler. It primes and fills in one shot. Contrary to conventional paint aerosols SprayMax's new design is an innovative nozzle technology combined with a new propellant technology. SprayMax has more yield, faster work-speed, and a broader spray pattern than conventional aerosols. The result: professional paint results, as if with a spraygun, but without the disadvantages... no paint mixing, no cleaning of spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!Salesman Notes: SprayMax Aerosols work much like a conventional spraygun. They have high transfer efficiency, and great atomization. How to Use: First, shake can vigorously for 2 minutes before activating. To activate, simply take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the button firmly. Shake again for two minutes to ensure activator is thoroughly mixed with primer. After activation, this product will last approximately 24 hours. Product Characteristics: SprayMax Rapid Primer Filler is a high class, two component filler primer for professional priming of small and average size areas, as well as parts coating and spot repair. Universally applicable on sanded existing coats, metallic and zinc/coated surfaces. Overcoatable with any 1K and 2K topcoat systems.Preparation: Properly clean and sand surfaces to be primed. Use a good quality grease and wax remover before priming. Apply 2-3 coats of product. Allow 5-10 minutes between coats. After drying approximately 1 hour product can be sanded and coated with most topcoat systems.
