2.0HP Swimming Pool Pump Motor Hayward w/Strainer Filter In/Above Ground 7080GPH

Description

The 2HP swimming pool pump is a reliable pool tool that allows you to swim comfortably in the summer without worrying about the water quality and you can relax and enjoy the refreshing pool water. With a reinforced PP shell and copper motor that offers high-performance suction power and optimal flow, it can efficiently filter the circulating water and is suitable for various swimming pools, hot tubs, and spas, bringing you a pleasing swimming experience.

Application

It is mainly used for in/above-ground pools, hot tubs, and spas in all types and sizes. It is also widely suitable for water circulation in hotels, restaurants, aquaculture, hydro massage baths, spas, jets, rinses, and other filtration systems, and also does water circulation and filtration in water treatment facilities and decorative pools and other circulation systems.

Specification

Pump Model: HBP1500

Motor Model: HT-10

Color: Black

Material: Iron, PP

Processes: Injection Molding, Electroplating

Style: Modern

Power Source: Corded Electric

Plug: US Standard

Motor Type: Single-speed Pure Copper Motor

Noise: ＜75dB

Voltage: 110-120V, 60Hz

Power: 1500W, 2HP

Current: 12.5A

Flow: 410-300L/min, 108.3-79GPM

Maximum Flow: 450L/min, 118.8GPM

Head: 5-10m/16.4-32.8ft

Maximum Head: 17m/55.77ft

Rotation Speed: 3450r/min

CAP: 124-148μF

I.CL.: 155(F)

Protection Grade: IP X5

Suitable Temperature: Max 50℃/122℉

Inner Coupling: 1/2" NPT  

Connector Diameter: 48.5mm/2inch

Cord Length: 95cm/37.4inch

Net Weight: 13kg/28.66 lbs

Gross Weight: 13.3kg/29.3 lbs

Package Size: 62*24*35cm/24*9.45*13inch

Package Included

1* Pool Pump

1* English Manual

Other Accessories for Assembly

Notes  

1. This pump is for use with permanently installed pools only. Please do not use it with storable pools.

2. Please fill the pump with water before use to prevent the motor from overheating and avoid damage to mechanical seals and impellers.

3. This pump can only be installed and repaired by qualified professionals. All wiring must be carried out by licensed electricians to ensure compliance with all state and local regulations.

4. To reduce the risk of electric shock, please install it at least 10ft from the inside walls of a pool and do not use an extension cord to connect the unit to the electric supply. Please connect it to a grounding-type receptacle protected by a ground-fault circuit interrupter (GFCI).

5. For the safety of your device, please do not cut the power cord without authorization during use, and it's advised to protect electrical components from the weather.

6. If your swimming pool has a salt generator, it will be the last component before the water returns to the swimming pool.

7. Please allow the slight color difference caused by the shooting light and the 1-3cm error due to manual measurement, and make sure you do not mind before ordering.