Our Katana Front Turn Signal Lamp Assembly are a direct OEM Replacement part, but without the OEM Dealer Indicator price. These Katana Blinkers also have E-Mark Certified (E-11 and E-4)stamped lenses. You must use your existing OEM hardware to install the marker lights into your Katana fairings.
Stats:
Dimensions: OEM Style Direct Fitment
Base: High Impact Plastic
Lens:Smoked High Impact Plastic
Bulb: Amber Incandescent, Single Filament, 12 Volt, 21 Watts
Plug: High Impact Plastic, Female, Two Pin Slots
Wiring: Two Wire, 12 Volt Systems
Replaces OEM(R/L): 35601-08F00 / 35602-08F00, 35610-08F00 / 35630-08F00
Fitment:
Suzuki
98-03 GSX600F Katana
04-07 GSX600F K4-K5 Katana
98-05 GSX750F Katana
04-07 GSX750F K4-K5 Katana
Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; most likely you will be removing your fairings to properly mount these Turn Signals. Locate the existing Turn Signal Wires on your Motorcycle and since these are designed for plug-and-play installation, it is a matter of unplugging your current lights and plugging in our turn signal lamp assembly. Test the light and ensure it functions properly prior to putting everything back together. If it's good, mount the lamp unit onto the motorcycle using your existing hardware and repeat the process for the other side. Reassemble, Ride and Enjoy! Do not over-torque your mounting screws when re-installing, it should be snugged, hand-tight and not forcefully clamped down.
