Key Features:
- Easily add basic control of a bipolar stepper motor to a variety of projects
- Support six different control interfaces
- Open-loop speed or position control of one bipolar stepper motor
- Selectable microstep modes up to 1/256-step resolution
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8825 driver and ships with soldered header pins and terminal blocks. It can operate from 8.5 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).
Item Specifics
Model: Tic T825
Motor driver: DRV8825
Control interface: USB; non-inverted TTL serial; I2C; RC servo pulses; analog voltage; quadrature encoder
Minimum operating voltage: 8.5 V
Maximum operating voltage: 45 V
Continuous current per phase without heatsink: 1.5 A
Maximum current per phase with cooling: 2.5 A
Maximum step rate: 50000 PPS
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Reverse voltage protection up to 40 V
Size: 1.50″ × 1.05″ × 0.47″
Weight: 8.5 g
