Duke 153129 0.37 x 0.02 x 19 in. Burner Tube

A burner is an element on a kitchen stove that generates localized heat for cooking. A gas burner is a device that produces a controlled flame by mixing a fuel gas such as natural gas, or propane with an oxidizer such as the ambient air and allowing for ignition and continued combustion. Gas may be supplied to the burner prior to combustion at a pressure sufficient to induce a supply of air to mix with it; the mixture passes through several long narrow openings or a nozzle to mix with additional air in the combustion chamber. An infrared burner works by focusing the flame of a standard gas burner onto a ceramic tile that has thousands of microscopic holes in it. This converts the heat of the flame into infrared energy. A tube (tubular section, tubing, or hollow cylinder) usually but not necessarily of circular cross-section, used mainly to convey substances which can flow liquids and gases (fluids), slurries, powders and masses of small solids. Plastic tubing is widely used for its light weight, chemical resistant, non-corrosive properties, and ease of making connections. A tube may also reference a florescent light bulb or a housing of lamps or LEDs.

A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve. More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. They can be electromechanical actuators such as an electric motor or solenoid, pneumatic actuators which are controlled by air pressure, or hydraulic actuators which are controlled by the pressure of a liquid such as oil or water. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.

• 0.37 x 0.02 x 19 in. Burner Tube
• Made with high quality material

• Length: 3.6 in / 9.14 cm
• Width: 18.6 in / 47.24 cm
• Height: 2.5 in / 6.35 cm
• Size: 0.37 x 0.02 x 19 in.