3/4 OD Steel Weld-On Double-D Steering Shaft 10.5 Inch Length

Steering shaft is 3/4" O.D round material with a 1" long 3/4" "DD" design on each end. (see note below) This steering shaft entails: 1018 Steel. 3/4" DD configuration on each end and will be a 3/4" Weld-on if cut to length. Excellent for steering shafts or other uses. Order desired length. NOTE: This DD shaft is only milled with flats on both ends for 1" of length of the shaft. It is not milled the entire length of the shaft and therefore, can not be cut to length unless it is going to be welded to a 3/4" round or has new flats milled into the end. Please see Flaming River DD shaft if fully machined DD shaft is required.