Special Notes:
Please note: Tire sizes vary by machine please check your current tire and wheel size before ordering. Adding oversize tires may alter the handling characteristics of your factory equipped vehicle. Extreme care must be used to prevent loss of control or roll over during sharp turns or abrupt maneuvers.
Oversize tires may rub under extreme steering angles, and extreme suspension compression.
Size 25x10-12 Tire Construction Bias Max Seating PSI 15 Max Operating PSI 7 Position Rear Sidewall Blackwall Weight 23.23 lbs. Rim Size 12 Directional No Tread Depth 26/32 Ply Rating 6
SAFETY Refer to your machine’s documentation for proper maintenance. Always give tires a gentle “run-in†period of 100 miles to get the feel of new tires. Always match the front and rear tires for optimal handling, safety and performance. Mixing radials with bias may adversely affect handling and stability. Worn/unworn tire combinations and worn tires used in wet conditions can result in deteriorated handling. WARNING The charts and info on this page do not imply interchangeability. Consult your machine’s manual to determine correct replacements, clearances, compatibility and stability, load-bearing capacity, speed rating, radial vs. non-radial, pattern and tread compound requirements, inflation recommendations and front-to-rear tire matching. Wrong selection can result in tire failure or loss of control with serious injury or death.
