AprilAire 8083 Flush-Mount Temperature and Humidity Sensor Support Module

Monitor the temperature and humidity in an area away from your thermostat with the AprilAire Flush-Mount Temperature and Humidity Sensor Support Module. This small add-on module connects to any AprilAire thermostat with Support Module capabilities. It can be used to remotely monitor various rooms or a larger space. The readings can be averaged to create controlling values for the thermostat. FEATURES: Senses temperature from -40 to 130 degrees F (-40 to 55 degrees C). Senses humidity from 0 to 99 percent R.H. non-condensing. Flush-mounts into wall for subtle, elegant installation. Metal cover may be painted or wallpapered. INSTALLATION: The module flush-mounts into a small hole in the wall up to 1,000 feet away from your AprilAire thermostat (sold separately). It connects to the thermostat using Cat5 wiring (sold separately). The included wire nuts are used to connect the wires from the thermostat to the wires on the module. The module has a metal cover that can be painted or wallpapered for blending into the wall. CONTENTS: Flush-Mount Temperature and Humidity Module, Wire Nuts. NOTE: Requires use with an AprilAire thermostat that features Support Module capabilities (sold separately). Wire not included. SPECS: Manufacturer Part Number: 8083. Temperature: -40F to 130F (-40C to 55C). Temperature Accuracy: Comfort Range: +/-1F; 60F to 80F; Control Range: +/-2F; 40F to 100F. Humidity: 0 to 99 percent R.H. (non-condensing). Humidity Accuracy: +/-5 percent R.H.; 20 to 80 percent R.H. Electrical Operating Voltage: 24VAC (18 to 30VAC). Max. Wire Length from Module to Thermostat: 1,000 feet.