Fabtech 3" CRAWLER W/ DLSS RESI 2020-22 JEEP JT 4WD GAS

3" CRAWLER W/ DLSS RESI 2020-22 JEEP JT 4WD GAS.
Fabtech's Crawler long arm Gladiator lift kit is built to meet the most experienced driver's expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the Crawler kit is the Link Arm geometry and ground clearance. The location of the of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the Gladiator's sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arms are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the Gladiator frame for hard offroad use. Adjustable rear links utilize the factory frame and axle brackets for an easy installation. The Fabtech lower Link Arms are massive and built of 2in OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech's legendary 5 Ton joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street. This high quality Long Arm Gladiator lift kit will provide exceptional offroad performance with good highway manners for the discerning Jeep enthusiast. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. What's In The System: Front Upper and Lower Link Arms. Rear Upper and Lower Link Arms. Front Link Arm Crossmember. Heavy Duty Flipped Draglink. Front and Rear Track Bar Brackets. Front and Rear Corner Specific Dual Rate Coil Springs. Front and Rear Sway Bar Links. Front Shock Mount Bracket. Front and Rear Bump Stop Extensions. LINK ARMS: Heavy duty is the only way to describe these