Crown Pro XLi3500 2700w 2 Channel PA Power Amplifier+DBX 231S EQ+Rack Case Bag

Features of XLi3500:
Crown Pro XLi3500 2700 Watt 2-Channel DJ/PA Power Amplifier
RMS Power @ 4 Ohms: 1350 Watts x 2 Channels
RMS Power @ 8 Ohms: 1000 Watts x 2 Channels
RMS Power @ 8 Ohms Bridged: 2700 Watts x 1
Frequency Response: 20 Hz - 20 kHz
THD: <0.5%
Distortion: <0.35%
Slew Rate: >10V/us
Voltage Gain: 36 dB
Damping Factor: 8 Ohms, 10 Hz to 400 Hz
Signal to Noise Ratio (A-Weighted): >100 dB
Crosstalk: -75 dB, -59 dB
Input Sensitivity: 0.775V or 1.4V
Input Impedance: 20k Ohms, 10k Ohms
AC Line Voltage and Frequency Configurations: (+10%) 120V~60 Hz;220V~50/60 Hz; 230-240V~50/60 Hz
IEC Power Connector: 15A
Stereo/parallel/bridge-mono mode
User selectable input sensitivity - 0.775V and 1.4V
Efficient forced-air cooling prevents excessive thermal buildup
Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference
Product Dimensions: 19" x 3.5" 14.4" inches
Product Weight: 43 Lbs.

---

Features of 231S:
Dual 31-band, 1/3-octave Constant Q frequency bands
Switchable boost/cut ranges of ±6 or ±12 dB
Front panel bypass switch
±12 dB input gain range
4-segment LED ladders for monitoring output levels
XLR and TRS Inputs and Outputs
Frequency Response of <10Hz to >50kHz
Dynamic range of greater than 108dB
Specifications:
Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
Input Type: Electronically balanced/unbalanced, RF filtered
Input Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
Output Type: Impedance-balanced/unbalanced, RF filtered
Output Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output: >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm
balanced/unbalanced (into 600 ohm)
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: <10Hz to >50kHz, +0.5/-3dB

---

Video of RCXFM20E-B:

Features:
Rockville RCXFM20E-B 20 Foot Nickel Plated Female to Male XLR Microphone Cable
XLR Connectors with Internal Strain Relief for Rugged Reliability
100% Copper Conductors for Enhanced Signal Clarity
90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
Length: 20 Ft
Color: Black

---

Video of RRB45:

Features:
Rockville RRB45 4U Space Rack Bag w/ 16" Inch Depth
Complete access to front & back of racked gear
Comfortable shoulder strap
Black carpeted Rack case is removable from the bag
Front pocket storage compartment is large enough for mics and cables and otheraccessories
Dimensions (exterior): 23.5” x 9.7” x 18”
Weight: 14.9 lbs
Fit Guide:
Solid State Logic X-Desk