Empire VSR30NAT 30 in. Millivolt Control Slope Glaze Burner, Natural Gas

This burner is certified for use in an existing fireplace with an open damper flue. Vented systems do not burn the gas used cleanly and therefore need to be exhausted through an open chimney - similar to burning wood. A vented burner can only be used in this application. It is not convertible to vent-free operation. A vented burner can be rated up to 75,000 BTUs to create taller flames but is still only rated as a decorative system and is not for use as a heat source and cannot be operated by a thermostat. A vented burner is only available in a manual model and a millivolt model. This is a manual model. The BTU input range is from 40000 - 65000.

• Fireplace Style Single Sided
• This log set is to be installed only in a solid-fuel burning fireplace with a working flue constructed of non-combustible material
• The vent damper must also have a damper clamp attached to it to keep the damper from accidentally closing during operation
• Certified for installation as vented log set ONLY
• The installer must block the fireplace damper partially open
• A special flue-damper clamp is included with burner

• Size: 30 in.
• Fuel Type: Natural Gas