Hawaiian Car Seat Covers, Gray Big Turtle, set of 2 Front Bucket seat covers, Made in Hawaii USA

One-piece design slips over your car seat and is held secure with elastic stretch liners fastened under the seat and behind the seat back. Polyester microfiber fabric with polyester liner pad quilted. Besides protecting your cars seats from the sun, wear and tear you can wash these in the washer when they get dirty.
These Hawaiian car seat covers are sold as a matching pair of two seat covers for driver and front passenger bucket seats only. Covers for the other seats are not available

Q: What are the measurements of the Hawaii seat cover?
32" from top headrest down to seat
20" from backrest to front edge of seat
22" wide for the seat
10" wide at top of headrest and tapering 22" wider down to the seat

All covers have a black elastic backing that must be stretched around the sides and back of the seat and a little under the seat to allow the Hawaii seat cover to accommodate bucket seats up to two inches smaller or bigger from these measurements.
You can follow this step to install the seat cover:
1) Slip the cover over the head rest onto the seat.
2) The two black elastic loops are used to help hold the covers to the back of theseat so they don't slip forward. They do not come with or need hooks but arestrap loops. They are used to go into the crevasse between the seat and backseat support and pulled through down and under the seat to loop over orhold on to anything available under the seat such as the seat cushion spring,plastic molding etc.
3) The two strap near the front of the covers are to be pulled down and loopunder the front seat to hold the front of the covers down by looping overanything available under the front seat such as the seat cushion spring,plastic molding etc..