

Hero image 0 of JBL CSMA280 Commercial Series Two-Channel 80W Powered Audio Mixer/Amplifier, 0 of 8
JBL CSMA280 Commercial Series Two-Channel 80W Powered Audio Mixer/Amplifier
(No ratings yet)
Key item features
- Versatile Amplification: This 2-channel, 80W amplifier supports 4/8 Ohm, 70V, and 100V systems, making it suitable for diverse commercial and industrial audio setups.
- Extensive Connectivity: Features 8 input channels (Euroblock Mic/Line, RCA) and 2 output channels, along with Hi-Z and 27V Phantom Power switches for flexible audio source integration.
- Intelligent Audio Control: Includes voice-activated ducking, priority mute, and a sleep mode for efficient power management and seamless audio transitions.
- Comprehensive Controls: Front panel offers 8 input level knobs, 2 output volume controls, power switch, and bass/treble potentiometers, while the rear panel has input-routing dip switches and Mic/Line selectors.
- Robust Performance: Delivers a frequency response of 20 Hz - 20 kHz for 4/8 Ohm outputs and 80 Hz - 15 kHz for 70V/100V outputs, with a signal-to-noise ratio greater than 90 dB.
- Multiple Connectors: Equipped with IEC power input, 2 aux out points, various 3-pin and 5-pin Euroblock connectors, 6 dual RCA inputs, and 2 RJ45 remote volume ports.
Generated by AI
Specs
- Rms power rating1000 W
- Speaker config.2.0
- Peak audio power handling800 W
- BrandHarman Kardon
- Rec. useResidential
- Impedance16 ohm
Current price is USD$876.00
Price when purchased online
- Free shipping
Free 30-day returns
How do you want your item?
Columbus, 43215
Arrives by Wed, Apr 29
|Sold and shipped by Audiosavings
4.288235294117647 stars out of 5, based on 1700 seller reviews(4.3)1700 seller reviews
Free 30-day returns
About this item
Product details
Features:
- JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V and 8 inputs
- For Commercial and Industrial Use
- 80W into 8 or 4 Ohm Loads
- 10W Per Channel
- 8 Input Channels, 2 Output Channel
- Usable with 70 & 100V Systems
- Euroblock Mic/Line & RCA Inputs
- Hi-Z & 27V Phantom Power Switches
- Sleep Mode & 2 Auxiliary Outputs
- Voice Activated Ducking & Priority Mute
Specifications:
- Maximum Output Power: 800 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD
- Insertion Loss: 1 dB maximum for 70 and 100 V outputs
- Continuous Power: 10 W per channel
- Line Output Level: 5.0 V RMS into 10 kOhms
- Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS
- Number of Channels: Input: 8, Output: 2.
- Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz, ±2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz ±2 dB. Line Out: 20 Hz - 20 kHz, ±1 dB
- Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5%, 20 Hz to 20 kHz. Line Output: 0.05% typical
- Signal to Noise Ratio: > 90 dB
- Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms.
- Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms.
- Crosstalk: -70 dB @ 1 kHz
- Front Panel:
- 8 x Input level rotary knobs
- 2 x Output volume-attenuating knobs
- 1 x Power switch
- 2 x Bass potentiometers
- 2 x Treble potentiometers Rear Panel:
- 2 x Input-routing dip switches (including phantom and Hi-Z switches)
- 8 x Mic/Line selector switch
- 2 x Vox adjustment switches Indicators: Front Panel:
- 8 x Input signal presence ring, green
- 2 x Output volume ring, green
- 1 x Power switch ring, green/blue Connectors:
- Rear Panel:
- 1 x IEC power input
- 2 x Aux out connection points
- 6 x 3-pin euroblock connectors
- 6 x 3-pin euroblock connectors
- 2 x 5-pin euroblock connectors
- 6 x Dual RCA input connectors
- 2 x RJ45, remote volume
- Operating Temperature / Humidity: 32 to 95°F / 0 to 35°C, 95% RH (non-condensing)
- Storage Temperature: -4 to 185°F / -20 to 85°C
- Phantom Power: 27 VDC
- AC Input: 100-240 VAC, 50/60 Hz
- Features: JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V and 8 inputs. For Commercial and Industrial Use. 80W into 8 or 4 Ohm Loads. 10W Per Channel. 8 Input Channels, 2 Output Channel. Usable with 70 & 100V Systems. Euroblock Mic/Line & RCA Inputs. Hi-Z & 27V Phantom Power Switches. Sleep Mode & 2 Auxiliary Outputs. Voice Activated Ducking & Priority Mute. Specifications: Maximum Output Power: 800 W per channel into 4 Ohms or 8 Ohms, 1 kHz, ? 0.5% THD
- Insertion Loss: 1 dB maximum for 70 and 100 V outputs. Continuous Power: 10 W per channel. Line Output Level: 5.0 V RMS into 10 kOhms. Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS. Number of Channels: Input: 8, Output: 2.
- Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz 2 dB. Line Out: 20 Hz - 20 kHz, 1 dB. Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5%, 20 Hz to 20 kHz. Line Output: 0.05% typical. Signal to Noise Ratio: > 90 dB. Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms.
- Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms.. Crosstalk: -70 dB @ 1 kHz. Controls: Front Panel: 8 x Input level rotary knobs. 2 x Output volume-attenuating knobs. 1 x Power switch. 2 x Bass potentiometers. 2 x Treble potentiometers. Rear Panel: 2 x Input-routing dip switches (including phantom and Hi-Z switches). 8 x Mic/Line selector switch. 2 x Vox adjustment switches. Indicators: Front Panel: 8 x Input signal presence ring, green
- 2 x Output volume ring, green. 1 x Power switch ring, green/blue. Connectors: Rear Panel: 1 x IEC power input. 2 x Aux out connection points. 6 x 3-pin euroblock connectors. 6 x 3-pin euroblock connectors. 2 x 5-pin euroblock connectors. 6 x Dual RCA input connectors. 2 x RJ45, remote volume. Operating Temperature / Humidity: 32 to 95F / 0 to 35C, 95% RH (non-condensing). Storage Temperature: -4 to 185F / -20 to 85C. Phantom Power: 27 VDC. AC Input: 100-240 VAC, 50/60 Hz
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it. Â
Specifications
Rms power rating
1000 W
Speaker config.
2.0
Peak audio power handling
800 W
Brand
Harman Kardon
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Warnings
Ingestion Hazard
This product contains a battery. Death or serious injury can occur if ingested. A swallowed battery can cause Internal Chemical Burn in as little as 2 hours. Keep new and used batteries OUT OF REACH OF CHILDREN. Seek Immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
Check out these related products
Dayton Audio SPA250 250 Watt Subwoofer Plate Amplifier $297.46
$29746current price $297.46Dayton Audio SPA250 250 Watt Subwoofer Plate Amplifier
Bogen CC4041 Amplifier 40w 4in/1priority Lv $217.67 Was $232.17
$21767current price $217.67, Was $232.17$232.17Bogen CC4041 Amplifier 40w 4in/1priority Lv
OSD SMP500 800W Mono Class D Subwoofer Amplifier, Auto Sensing, 4 -8 Ohm ETL, CE Certified DSP App Control $499.99
$49999current price $499.99OSD SMP500 800W Mono Class D Subwoofer Amplifier, Auto Sensing, 4 -8 Ohm ETL, CE Certified DSP App Control
Rockville RPM48S 2000w Powered 4 Channel Mixer/Stereo Amplifier w Bluetooth/EQ $164.95
$16495current price $164.95Rockville RPM48S 2000w Powered 4 Channel Mixer/Stereo Amplifier w Bluetooth/EQ
25 out of 5 Stars. 2 reviewsNew BOSS AUDIO Riot MR1004 400 Watt 4 Channel Marine Power Amplifier Amp Mosfet $48.99 Was $69.00
2 optionsAvailable in additional 2 options$4899current price $48.99, Was $69.00$69.00New BOSS AUDIO Riot MR1004 400 Watt 4 Channel Marine Power Amplifier Amp Mosfet
593.5 out of 5 Stars. 59 reviewsOSD Audio XPA1000 70V Commercial Amplifier 1000W 2 Channel, Class D, RS232, 12V Trigger, Remote Control $1,299.99
$1,29999current price $1,299.99OSD Audio XPA1000 70V Commercial Amplifier 1000W 2 Channel, Class D, RS232, 12V Trigger, Remote Control
Crown XLi1500 Two-channel, 450-Watt at 4Ω Power Amplifier $569.00
$56900current price $569.00Crown XLi1500 Two-channel, 450-Watt at 4Ω Power Amplifier
Customer ratings & reviews
0 ratings|0 reviews
This item does not have any reviews yet
