【About this item】
Shipping Notice：Can not ship to Puerto Rico,Alaska/Hawaii
Control pressure：Control pressure
Body material：304 stainless steel
Pneumatic form：plastic head
Spool seal：PTFE
Stem seal：PTFE/FKM
Suitable Media：Air,Fuel,Oil,Wastewater,Water
PTFE/FKM：FKM/NBR
Medium temperature：-10 ° C - +180 ° C
Ambient temperature：-10 °C - +60 °C
Viscosity：up to 600MM2/s
Control pressure range：0.3-1MPA
MPN：Does Not Apply
Valve Operation：Air-Operated
Brand：Unbranded
Interface：DN15
Parameter：
Interface: DN15
Control pressure: 0.3Mpa-1Mpa
Body material: 304 stainless steel
Pneumatic form: plastic head
Spool seal: PTFE
Stem seal: PTFE/FKM
Piston seal: FKM/NBR
Applicable medium: water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid or weak alkali solution
Medium temperature: PTFE: -10 ° C - +180 ° C
Ambient temperature: -10 °C - +60 °C
Viscosity: up to 600MM2/s
Control medium: air/neutral gas
Control pressure range: 0.3-1MPA
Installation: Install as needed, preferably with the actuator facing up
Features: large flow, long life, maintenance free, reliable
Widely used in: beer beverage filling equipment machinery, textile printing or bleaching, gas industry pharmaceutical and medical equipment, pharmacy, chemical industry high temperature sterilization, disinfection; foaming machinery, foaming equipment; water pollution treatment.
Installation and removal:
1. Connect the valve to the pipe to ensure that it is in the same direction as the flow and attached to the body (the outside of the body represents the direction of fluid flow, according to the installation);
2. Please remove the actuator when welding installation;
3. Threaded or flanged: correct installation;
4. Disassembly: Ensure that the pressure has been removed before disassembling the valve; carefully disassemble and properly store the thread and sealing material after removal.
5. The torque required for the connection of the valve and the pipeline is large enough. The torque value of the torque is as follows: DN15 to 40Nm
6. Ensure that the pipeline and no residual interface when installing.
7. Make sure there are no leaks before use.
Package Included:
1*DN15 Angle Seat Valve
