Hallowell U3288-3G-PT Hallowell Galvanite Locker, 36 inch W x 18 inch D x 78 inch H, 729 Parchment, Triple Tier, 3-Wide,

Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion Make all exposed metal edges safe to touch Weld frame members together to form rigid, one-piece structure Weld, bolt, or rivet other joints and connections as standard with manufacturer Grind exposed welds flush Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates and recessed handle- Type - Triple Tier- 3-Wide- Knock-Down- Color - 729 Parchment- Dimensions - 36 W x 18 D x 78 H inFinishing- All locker parts to be cleaned and coated after fabrication with a seven stage zinciron phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish Color to be #729 Parchment throughoutFrame- Fabricate of 16 gauge minimum galvanneal sheet steel channels, with integral continuous door stopstrike formed on both latch and hinge side vertical members Cross frame members of 16 gauge galvanneal formed into channel shapes, including intermediate cross frame members on double and triple tier frames with doors over 18 in high lockers shall be securely welded to the vertical framing members to ensure rigidity Rubber bumpers shall be provided to cushion door closingGalvanite KD Wardrobe Doors- Doors 12 in wide x 24 in high and over to be fabricated from single sheet prime 16 gauge galvanneal sheet steel with single bends at top and bottom and double bends at the sides The channel formed by the double bend at the latch side is designed to fully conceal the lock bar Doors shall be louveredGalvanite KD Box Doors- Doors 12 in high to be fabricated from single sheet prime 18 gauge galvanneal sheet steel with single bends at top, bottom and sides Doors shall include a combination friction catch door pull Padlock Strike Plates are optional Doors shall be fabricated to accept a built-in combination lock or padlock Doors with projecting spring latches shall not be acceptable Doors shall be louveredStainless Steel Recessed Locker Handle- All wardrobe doors 24 in and higher shall have a seamless, deep drawn recessed stainless steel handle shaped to receive a padlock or built-in combination lock The recess pan shall be deep enough to have the lock be flush with the outer door face Box doors 12 in high shall be equipped with a combination friction catch door pull as stated aboveLatch Assembly- The latching mechanism for wardrobe doors shall be finger lift control type constructed of 14 gauge minimum steel with a nylon cover that has a generous finger pull Spring activated nylon slide latches shall be completely enclosed in the galvanized lock channel allowing doors to close with the lock in the locked position Locking devise shall be designed for use with either built-in combination locks or padlocks Latch hooks shall be securely welded to the vertical frame channel on the strike side to engage the nylon slide latches Three latch hooks for doors 72 in high, two latch hooks for doors 36 in highDoor Hinges- All doors shall include a 16 gauge continuous piano hinge welded to the door and riveted to the frame All doors to be right hand, side hingedBody- Fabricate back and sides of 24 gauge minimum galvanneal sheet steel, with double flanged connections extending full height Form top, bottom and intermediate tier dividers of 24 gauge minimum sheet steel with single return bends at all sides Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal frame members at not less th SKU: HLWL5175