DBX DriveRack PA2 Sound Signal Processor Speaker Management System PA 2+Control

Package Includes:

(1) DBX DriveRack PA2 Complete Sound Signal Processor Speaker Management System PA 2(1) DBX ZC1 Wall Mounted Programmable Zone Controller For DriveRack and ZonePro ZC 1

Description of PA2 NEW:

All You Need to Get theMost From Your PA. Now With Complete Control From Your Mobile Device.
The DriveRack PA2 provides all the processing you need between your mixerand amplifiers to optimize and protect your loudspeakers. With the latestadvancements in dbx’s proprietary AutoEQ and AFS algorithms, a new input delaymodule for delaying the FOH system to the backline, Ethernet control via anAndroid, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2continues the DriveRack legacy of great-sounding, powerful, and affordableloudspeaker management processors, for a whole new generation.

Features of PA2 NEW:

• DBX DriveRack PA2 Complete Sound Signal ProcessorSpeaker Management System
• All New Setup Wizard
• Streamlined AutoEQ™
• All New AFS™ (Advanced Feedback Suppression)
• Mobile Control (Android®, iOS®, Mac®, Windows®)
• dbx Compression
• dbx Limiting
• Graphic EQ
• 8-Band Parametric EQ (adjusted when using the AutoEQ)Input
• 8-Band Parametric EQs (used for speaker tunings)Output
• Sub-Harmonic Synthesis
• Crossover (supports full range, 2-way, and 3-waysystems)
• Driver Alignment Delays

Specifications of PA2 NEW:

• Input: (2) Line Inputs, (1) RTA Mic Input
  • Input Connectors: (2) Female XLR Line Inputs, (1)Female XLR RTA Mic Input
  • Input Type: Electronically Balanced, RF Filtered
  • Input Impedance: > 50 kOhm
  • A/D Converter: dbx Type IV Conversion System
  • CMRR: > 45 dB
  • Mic Preamp Phantom Power:: +15VDC (RTA)
  • Mic Preamp Equivalent Input Noise (EIN): <-117dB, 22Hz-22kHz, 150 ohm (RTA)
• Output: (6) Line Outputs
  • Output Connectors: Male XLR
  • Output Type: Electronically Balanced, RF Filtered
  • Output Impedance: 120 Ohms
  • Max Output: 20 dBu
  • A/D Dynamic Range: 112 dB A-Weighted, 110 dB Un-Weighted
  • Type IV Dynamic Range: 123 dB with transientmaterial, A-weighted, 22kHz BW; 121 dB with transient material,un-weighted, 22kHz BW; 115 dB typical with program material, A-weighted,22kHz BW
• Input Delay Length: 100ms
• Alignment Delay: 10ms Per Channel (60ms Total)
• Sample Rate: 48 kHz
• Dynamic Range: >110 dB A-Weighted, >107dB Un-Weighted
• THD + Noise: 0.003% Typical at 4dBu, 1 kHz 0dB Input Gain
• Frequency Response: 20Hz - 20 kHz
• Inter-Channel Crosstalk: < -110 dB, -120dB Typical
• Operating Voltage: 100-120VAC

Description of ZC1:

The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection an