Sewer Jetter Hose 1/8" NPT x 50' 4800 PSI & Set of (4) 3.5 Orifice Nozzles Kit

Sewer Jetter Hose & 4 Nozzles 1/8in. NPT x 50ft. 4800 PSI & 3.5 Button Nose Thruster Flusher Monster & Degreaser Nozzles Kit Includes:

• Schieffer 1/8" x 50' Sewer Jetter Hose
• 1/8" NPT Button Nose Sewer Jetter Nozzle 4 Piece Set 2.1 GPM 1500 PSI 3.5 Orifice

Sewer Jetter Hose 4800 PSI 1/8" NPT x 50' Black Thermoplastic Weather Oil & Abrasion Resistant Thermoplastic sewer jetter hose made in the USA for all types of medium and high-pressure jetting applications. Schieffer Sewer Jetter hose uses a reinforcement construction composed of one extra strong layer of textile braid. Schieffer uses a single pass with a twenty-four carrier braider vs two passes with a sixteen carrier braider like most of the competition. Covering the hose in a single pass keeps the layers of braiding closer and tighter together creating a stronger hose than other competitor's hoses using a two-pass process, that is not as tightly wound. Hose Construction

• Inner Tube: Thermoplastic polyester tube
• Reinforcement: One layer of 1/8" high tenacity polyester textile braid that is chemically bonded
• Cover: Black thermoplastic polyurethane that is oil, weather, ozone, and abrasion resistant
• Temperature Range: -40°F / +160°F

Hose Specifications:

• Hose Length: 50'
• Hose Size: DN 03 - Dash -02
• Hose Connections: 1/8" MPT (solid) + 1/4" MPT Bushing (swivel)
• Hose I.D: .16" (4mm)
• Hose O.D: .37" (9.5mm)
• Working Pressure: 4800 PSI - 331 Bar
• Proof Pressure: 6000 PSI - 414 Bar
• Burst Pressure: 12000 PSI - 828 Bar
• Bend Radius (MIN): 1" (25mm)

Schieffer Quality Guarantee: Schieffer is an ISO 9001:2008 certified in 2012, The company continues to implement and embrace the most modern practices of quality and continuous process improvement. Each batch is quality tested to meet or exceed expectations because of the following:

• Qualify all fittings
• Burst test hoses
• Leak test assemblies to confirm proper crimp
• Pin test each crimp to confirm proper internal crimp
• Full-Time Quality Control Dept that contributes to our overall performance

1/8" NPT Button Nose Sewer Jetter Nozzle 4 Piece Set 2.1 GPM 1500 PSI 3.5 Orifice Four Pack Button Nose Nozzle Kits are well suited for general drain cleaning applications. The nozzles short body and smooth round nose make it ideal for tight turns in P traps and elbows, reducing hang-ups. Increased functionality over typical round nose nozzles has been added with the addition of a second groove which permits steeper thrust angles and more pulling power while maintaining a streamlined body.

• Button Nose Nozzle Kit
• Features a round nose and short body to better navigate elbows and trees
• Widely used for sewer & drain cleaning applications
• Thread Size: 1/8" NPT-F
• GPM: 2.1
• Working PSI: 1500
• Max PSI: 10000
• Orifice Size: 3.5
• Max Temp: 310° F
• Material: Stainless Steel
• Overall Nozzle Diameter: .500"
• Overall Nozzle Length: .700"

Kit Includes:

• Thruster Nozzle - (3) rear jets at 25° thrust angle for maximum pulling power with (1) 0° forward jet to bore through obstructions
• Flusher Nozzle - (6) 45° rear flushing angle with good pulling power. Good general purpose cleaning nozzle
• Monster Nozzle - general purpose dual angle nozzle combining forces of thrust & flush for superior cleaning power.