Easy-to-flare and bend tubing works great as AN hard line and will save weight and money. Use with the included AN fittings, rubber flex line, and line clamps for a quick and easy fuel line solution! Kit Includes: (1) Speedway 3/8 OD Aluminum Hard Fuel Line/Tubing, 10 Foot Roll. (1) 3ft, Black Push-On Hose, AN6 Fuel Line Gas/Diesel 300 PSI. (2) Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -6 AN. (2) Russell 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter. (1) Earls 750006ERL Vapor Guard Screw Type 3/8 Hose Clamp 5/Pack. (1) Insulated Line/Tubing Mount Clamps, 3/8 Inch, Bag of 10. (1) Insulated Line/Tubing Mount Clamps, 5/8 Inch, Bag of 10. Speedway 3/8 OD Aluminum Hard Fuel Line/Tubing As featured on Classic Truck’s Week to Wicked. Watch the transformation here! Easy-to-flare and bend tubing works great as AN hard line. Use with tube nut couplers, sleeves and 37° flared AN fittings. Rated to 250 psi. Not recommended for high pressure (brake) applications. 10 ft. roll included. Learn more about flaring hard line and how to select proper automotive fittings by reading our tech article, The Principles of Automotive Fittings. 3ft, Black Push-On Hose, AN6 Fuel Line Gas/Diesel 300 PSI AN6 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F. Working Temp: -40 to +200 degrees F. Max Pressure: 300 psi. Compatible with gasoline & diesel fuels. 3 foot length included. When using at temp and pressure at the high end of the parameter, hose clamps should be utilized. *Not ethanol compatible. Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -6 AN Revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Manufactured from the highest quality aluminum and are then blue and red anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. -6 AN. Straight. Lightweight aluminum hose ends are completely reusable, and interchangeable. 37° angled sealing surface guarantees a positive anti-leak seal. Available in a Red/Blue corrosion resistant finish. Russell 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing) Connects 3/8" aluminum tube to -6 AN adapters. Unique crimp design eliminates tube flaring. Not for use with fuel injection. Earls 750006ERL Vapor Guard Screw Type 3/8 Hose Clamps Vapor Guard hose clamps provide easy assembly of hose to hose ends. Stainless steel construction. 3/8" diameter. Screw Style. Set of 5 included. Insulated Line/Tubing Mount Clamps Use these rubber coated fuel line tube clamps to finish your plumbing job. Tube clamps are made from zinc plated steel. Easy to work with, durable, and corrosion resistant. 2 sizes included: 3/8" and 5/8" 10 clamps per package/20 total clamps included.
