1 Pair - Universal Black License Plate Stalk Turn Signals
Amber Bulb - Clear Lens
Tired of looking at your old, over-sized Turn Signal side markers? Do you need to replace a broken OEM side marker? We have a great turn signal solution for you! Upgrade to our bright Universal License plate mounted blinkers. Our Lights are designed to install using your License Plate Brackets. Our Turn Signals High Impact Plastic Housing offers a great look with a stubby Arrowhead shaped Lens that covers the Incandescent Bulb. Mounting to the license plate is usually very simple as the Blinkers mount directly to the License Plate Frame. These are Universal Signals and can be installed on the front or rear of your Motorcycle, ATV, UTV, or Scooter with little to no modification required depending on your application.
Stats:
Name: Apache
Dimensions: Multiple, please see photo(s)
Housing: Black High Impact Plastic
Lens: Clear High Impact Plastic
Bulb: Amber Mini Bulb, Single Filament, 12 Volt, 10 Watt
Wiring: Two Wire, 12 Volt Systems
Fitment Information: This is a Universal Turn Signal Light; therefore, it has unlimited uses and mounting possibilities. This includes, but is not limited to: Sportbikes, Cruisers, Scooters, ATV, Quad, UTV, MX, Dirt Bike, Enduro, Dual Sport, Golf Carts, and even Snowmobiles.
Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty is low as these are a bolt on application. Once you pick a mounting location it's time to locate the existing Turn Signal Wires on your bike, you should have either a 3 or 2 wire system. If you have a 3 Wire System
, the wire for the running lights are not used in this installation.2 Wire System
The other two wires on your bike will be the Turn Signal Power (Positive Wire) and a Ground (Negative Wire). You may have to splice in an extra length of wire in order to reach from your current OEM light plugs to these aftermarket ones. Attach the YELLOW Turn Signal Wire to the Bikes Positive Signal Wire and the BLACK Turn Signal Wire to the Bikes Negative Signal Wire. Test the light and ensure it functions properly prior to putting everything back together. If it's good, repeat the process for the other side. Reassemble, Ride and Enjoy! Do not over-torque mounting nut when installing, it should be hand tight and not forcefully torqued down.
