Lockers shall Be "DigiTech Electronic Access KD Wardrobe and Box Lockers" as manufactured by Hallowell or approved equal. Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion. Make all exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer. Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates and recessed handle.
- Powered by 2 AA batteries (included) which provide in excess of 10,000 uses
- LED's flash to indicate low battery level
- Locker can be opened when batteries are low or dead with a mechanical master key override
- 8-digit master and sub-master codes for two levels of management security
- Tier - Single
- Wide - 1 in.
- Assembled
- Color - Parchment
- Dimension - 12 W x 12 D x 78 H in.
Finishing All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom powder electrostatically sprayed and baked at 325 degrees Fahrenheit for a minimum of 30 minutes to provide a tough durable finish.
Frame Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members. Rubber bumpers shall be provided to cushion door closing.
Wardrobe Doors Doors 20 in. high and over to be fabricated from single sheet prime 16 gauge (18 gauge for doors 9 in. wide) with single bends at top and bottom and double bends at the sides. Doors shall be louvered.
Box Doors Doors - SKU: HLWL4987
WARNING: 