BMZONCC for Mazda 2 2011 2012 2013 2014 2015 2016 2017 9003 H4 COB LED Headlight Bulbs Conversion Kit High Low Beam 6000K White

Our LED bulbs is to replace halogen headlamps.
But can not replace the HID headlamps. Please double check before order, thank you.

Product description:
light Source Model:COB Chip,super bright
Power: 40W
Lumen:3800LM
Operating voltage:DC9-32V
Beam Type:High beam & Low beam
Material: Aluminum PCB and PA66+30% GF Plastic
Beam Angle:360°
Bulbs Color : White
Lifespan:over 50000hrs
Luminous on all sides: 360 ° no dead angle
Working Temperature: -40-+80 Centigrade
Waterproof rate: IP 68
Connector Type:Plug and Play
Application :LED Headlights Headlamp Lamp Bulbs High or Low Beam
Color Temperature: 6000K
IP68 rated water and dust seal,over 30000hrs lifetime
 

Usage: headlight+foglight
(2pcs/set) Bridgelux COB Hi-Lo Beam LED headlight conversion kit
Latest COB chip light source,/360 degree no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay

Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan (12000R/Min),high Air flow for faster cooling rate

Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Package Included:
2PC H4 LED Headlight Bulbs