YNGYFEA M3 Bluetooth Wireless Gaming Mouse 3 Modes Connection Optical Ergonomic Computer Office Mouse For Laptop PC

Before upgrading

Micro switch: GM8.0

Encoder: F-SWITCH 1 million laps

Built-in lithium battery :300mA

After upgrading

Micro switch: TTC golden 60M

Encoder: TTC golden wheel 2 million laps

Built-in lithium battery :500 mAh

Note ：Pre-upgrade version，Post-upgrade version, sent randomly

Brand: ()

Product model:N3

Optoelectronic IC:PAM3395

Lithium battery:300mAh

Maximum speed:650IPS

FPS image processing:26000fps

Acceleration：50G

: 8ms/2ms（default）/1ms

Mouse foot : PTFE (black/white/gray）

Send randomly

Most of them are white mouse foot

Interface: Gold-plated USB2.0 Type-C

DPI:400 red, 800 blue (default), 1600 green, 3200 purple, 4800 yellow

DPI:26000DPI（Drive settings）

Wired/2.4GHz: red light 125HZ, blue light 500HZ,green light 1000HZ

Size:123.50*66*40mm

Net weight 59 ± 5G,

Driver installation: only Windows system is supported

Drive：http://www..cn/

Bluetooth pairing operation：

operating system：

Wired and 2.4G modes: WinXP/Win7/Win8/Win10/Win11/Macos

Bluetooth : Win8/Win10/Win11/Macos

Bluetooth pairing operation：

When the bottom three section switch is turned to the B icon, press the left, middle and right buttons at the same time, and the blue light of the scroll wheel position flashes, entering the pairing state. At this time, you need to turn on the Bluetooth device to search for the N3 Mouse before pairing. After the connection is successful, the indicator light goes out.

2.4G pairing operation:

When the bottom three section switch is turned to the G icon, press the left, middle and right buttons at the same time, and the green light of the scroll wheel position flashes to enter the pairing state. At this time, the receiver needs to inserted. After the connection is successful, the indicator light goes out. (Note: The factory has been paired and it is OK. If the 2.4G has , this step can followed

Wired :

When inserting Type-c data cable connection, the wired is preferred.