Tail Lights compatible for 2007-2013 Chevy Silverado 1500 2500 3500 Chevrolet Rear Lamps Assembly Driver Passenger Replacement Set

Hero image 0 of Tail Lights compatible for 2007-2013 Chevy Silverado 1500 2500 3500 Chevrolet Rear Lamps Assembly Driver Passenger Replacement Set, 0 of 7

Visit the Winjet Store

Tail Lights compatible for 2007-2013 Chevy Silverado 1500 2500 3500 Chevrolet Rear Lamps Assembly Driver Passenger Replacement Set

Key item features

Product guides and documents:
Installation Manual (PDF)
HOW TO INSTALL
1. Open the box and inspect the item. Verify what was received was what you ordered and that the item is free from physical damage or defect.
2. Remove the old tail light. First thing you have to do is undo the mounting screws on the outside, if there’s any. You’ll have to open the trunk or any rear door or opening on the vehicle to access the back of the tail light. The wiring harness must be disengaged from the assembly through its back.
3. Once the wiring harness is out, you can now undo the mounting screws or nuts, whatever fastener is used. With no more screws or nuts holding it in place, you can push out the assembly from behind. Check if the tail light assembly you just removed is the same as the new one.
4. See if they have the same components, design, and fasteners to ensure proper fitting. Fix the new assembly into the tail light pocket. Once it’s fitted into place, secure it with the screws or nuts. Tighten them properly. You can now plug in the wiring harness that you removed earlier.
5. Test the new assembly. Switch on the tail lights to see if they work. If not, then some adjustments should be done to the newly installed tail light kit. Put back any cover, trim, or component that was removed to access the tail light assembly.
* NOTE : If it is necessary to replace the bulb, lamp body and bulb are not tight enough to produce water mist，or bulb is not fit lamp body oringinally . Professional Installation is highly recommended.

Specs

Manufacturer part number
GWJ2020-0008-08
Vehicle make
Chevy, GMC
Vehicle model
Silverado
Vehicle year
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Tail light type
Rear Lamps Assembly
Brand
Winjet

Current price is $69.99

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives between May 9 - May 11

Sold and shipped by Winjet AutomotivePro Seller

4.5136186770428015 stars out of 5, based on 257 seller reviews(4.5)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Fitment:
2007-2013 chevy silverado 1500 2500 3500
Models with 3047 Reverse bulb
Not Compatible with Factory Models with 921 Reverse bulb
2007-2014 GMC Sierra 2500 HD W/T, SLE, SLT w/ Dual Rear Wheels Model
2007-2014 GMC Sierra 3500 HD 1st Design W/T, SLE, SLT w/ Dual Rear Wheels Model

Specification:
Lens Color: Red Lens
Housing Color：Chrome Housing
Condition: 100% Brand New and High Quality
Material: PMMA（OEM Grade）
Certification: DOT / SAE
Function: Turn Signal Red Lamps
Shade: PMMA
Lamp housing: PC&ABS
Not Included: Reverse Bulb: 3047 Signal Bulb: 3047 Parking Light Bulb: 3047
Product Size:10.8x4.53x15.56inch
OEM NO:
L:25958482,25877454, 25906842;
R:25958483,25877455, 25906843
Partslink NO:
L:GM2800207;
R:GM2801207

Package Includes:
1 Pair Tail Lights (Driver & Passenger Side)

Product guides and documents:
Installation Manual (PDF)
HOW TO INSTALL
1. Open the box and inspect the item. Verify what was received was what you ordered and that the item is free from physical damage or defect.
2. Remove the old tail light. First thing you have to do is undo the mounting screws on the outside, if there’s any. You’ll have to open the trunk or any rear door or opening on the vehicle to access the back of the tail light. The wiring harness must be disengaged from the assembly through its back.
3. Once the wiring harness is out, you can now undo the mounting screws or nuts, whatever fastener is used. With no more screws or nuts holding it in place, you can push out the assembly from behind. Check if the tail light assembly you just removed is the same as the new one.
4. See if they have the same components, design, and fasteners to ensure proper fitting. Fix the new assembly into the tail light pocket. Once it’s fitted into place, secure it with the screws or nuts. Tighten them properly. You can now plug in the wiring harness that you removed earlier.
5. Test the new assembly. Switch on the tail lights to see if they work. If not, then some adjustments should be done to the newly installed tail light kit. Put back any cover, trim, or component that was removed to access the tail light assembly.
* NOTE : If it is necessary to replace the bulb, lamp body and bulb are not tight enough to produce water mist，or bulb is not fit lamp body oringinally . Professional Installation is highly recommended.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Manufacturer part number

GWJ2020-0008-08

Vehicle make

Chevy, GMC

Vehicle model

Silverado

Vehicle year

2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.