Kirkey 88185KIT Degree Racing Seat, 18.5" w/Black 5 Point Harness

Racing Seat Designed for Dirt Late Model, Asphalt Late Models , Midwest Modifieds, Street Stock, Crate Late Models. Five (5) sizes available, (14", 15", 16", 17",18-1/2"). Kit comes with black cloth cover. 18 degree layback. Easily removable cover has additional ½" energy absorbing padding for extra lumbar support. Designed to accommodate all head and neck restraints. Constructed from TIG welded .100" 5052 grade aluminum. Additional MIG welding adds strength. Contoured elongated bottom reinforced for added thigh and hip support. Energy absorbing padding on seat bottom. Rib and reinforced shoulder supports have extra 1/2" energy absorbing padding directly on seat. Head restraint is adjustable both vertically and laterally and uses molded high density energy absorbing impact pads that eliminates upholstery. Head restraint can also rotate down for additional peripheral vision. Fabricated aluminum connector brackets for easy head adjustment. Left side of head restraint angled and shortened to allow easy entry, exit. Right and Left leg extensions built in. Lap and sub belt openings have molded rubber grommets to eliminate belt wear. Designed to accommodate all seat belt systems. Mounts direct to chassis or use mount listed below. KIT design reduces shipping cost.                                                   Features Designed for dirt late model, asphalt late models, modifieds, and street stock. 18 degree layback. Designed to accommodate all head and neck restraints. Black. Seat Belts Made with quality nylon webbing materials. Double stitched for extra strength in all critical areas. Individual 55-inch-long 3-inch-wide shoulder harness belts with pull-down adjustments. Features deluxe 3-inch-wide lap belt with pull down adjustments. Includes 2-inch-wide single anti-submarine belt. Traditional latch-and-link buckle is easy to use and includes easy to find pull tab. SFI 16.1 certified with date coded certification tags on shoulder, lap, and sub belts. All belts can be mounted as bolt-in or wrap around, 2-inch bolt-in tabs included. All belts meet or surpass IMCA, USAC, NASCAR, SCCA, and other racing specifications. A Traditional 5-Point Harness with The Features Racers Want. We know racing is your passion, it is ours too. However, we also know all too well that racing is not easy on the wallet. Far too often, by the time the racing budget is used on the major bits like driveline, tires, and so forth, there is not much left in the piggy bank for safety equipment like helmets, fire suits, and racing belts. We believe these items are just as critical to winning a race as having that new race-spec carb or a fresh set of tires, which is why we continually add to our Speedway Motors line of safety gear so that you have a budget-friendly option for staying safe on the track. Built to Handle the Stresses of Any Racing Venue Our Speedway Motors 5-point harness combo is just what you need for proper retention in your race car. Crafted from premium nylon webbing and double stitched in all critical areas, our racing seat belts are a great value while providing SFI 16.1 certification (dated labels sewn into shoulder, lap, and sub straps) so that you will pass inspection without issue. Built as a pull-down configuration where the strap ends are pulled down, or away, from the adjusters, makes belt adjustment quick and easy for the driver. The racing harness uses 3-inch-wide lap and shoulder belts while the single anti-submarine strap is 2 inches wide. The shoulder harnesses are a generous 55 inches in length, providing plenty of material to reach your harness crossbar or other approved mounting position. A standard latch-and-link design clasp makes securing harness ends easy while the quick-release pull tab makes belt release a one-handed operation for the driver or emergency personnel. Your Choice of Bolt-in or Wrap Around Installation Included We made our 5-point harness combo easy to install in your race car too