Speedway makes plumbing brake lines easy with this steel brake line kit that includes new lines and fittings to make your job less stressful. Kit Includes: (1) 25 Ft. Roll of Speedway 3/16 Inch PVF Coated Steel Brake Line. (1) Bag of 6 Right Hand Thread Steel Jam Nuts 3/8" (4) Steel AN3 Straight Bulkhead Adapters. (3) Bag of 6 Steel AN3 Tube Nuts. (3) Bag of 6 Steel AN3 Tube Sleeves. (6) Straight -3 AN Male to 1/8 NPT Male Adapter Fittings. (2) Steel -3 AN Straight Bulkhead Tee Adapter Brake Fittings. (1) Bag of 5 Weld-On Chassis Tabs, 1 Inch with 3/8 Hole. (4) 18" Braided S.S. Brake Lines - Straight AN3. Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings. Speedway 3/16 Inch PVF Coated Steel Brake Line Now available for your 3/16" brake line consideration is a new PVF Poly-Armour Poly-Vinyl Fluorine coated brake line. PVF coating is a highly durable 'plastic' coating that is 'baked and cured' to the line for a durable finish that provides a clean look and appearance with a dark olive green color. This provides extra protection from corrosion, debris, and road surfacing solutions. Also offers superior bend-ability without kinking and bends easier than standard brake line tubing. This makes Poly-Armour the easiest line to work with-period! Underneath the PVF coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing. Considered a premium line, Poly-Armour hard line should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel etc. PVF Poly-Armour coated line is the perfect choice for the racer for those weekend after race chassis washes week after week or any street rod fabricator wanting to utilize a hard line application for that beautiful finish that will last for years. Available in a 25' roll of 3/16" line. This line bends easily and smoothly with hand tools and can be flared with a 37° AN flaring tool, or 45° double flaring tool. Use in conjunction with our 3/8"-24 inverted flare male brake line nuts, or AN tube nuts and sleeves. Right Hand Thread Steel Jam Nuts 3/8" Made from premium steel (zinc-coated for corrosion prevention) 3/8 Inch-24 NF Fine Thread. Sold in bags of six nuts. Right hand thread. Steel AN3 Straight Bulkhead Adapters Straight bulkhead AN 3 steel adapters. Steel AN3 Tube Nuts All steel AN 3 tube nuts. The go-to for your custom brake fluid system. Provides the best seal utilizing a 37 degree flare to ensure your system stays leak free for many years to come! All steel construction. AN 3 Female. Straight -3 AN Male to 1/8 NPT Male Adapter Fittings These steel fittings adapt 1/8" NPT ports to -3 AN line. Commonly used in brake systems when converting pipe thread to a 37-degree flare (AN) Useful for plumbing brake line/hose to calipers, inline residual pressure valves, and inline proportioning valves. Steel -3 AN Straight Bulkhead Tee Adapter Brake Fittings These bulkhead tee adapter fittings are manufactured from zinc finished steel to exacting standards for tight, leak-free connections. Plumb your racer like a pro with our bulkhead tee adapter fittings. TEE bulkhead -3 AN steel adapters. -3 AN. Steel. Male Threads. Weld-On Chassis Tabs, 1 Inch with 3/8 Hole Weld-on tabs for miscellaneous mounting jobs. 1" Long, 3/8" Hole, .120" Steel. 18" Braided S.S. Brake Lines - Straight AN3 Braided stainless covering over a Teflon inner liner. Perfect for brake lines, clutch lines and gauge lines. Straight AN3 fittings on both ends. 18" each in length. Zinc Plated Steel Ends.
